 Front 1/4 Panel Rust Spot |
  |
 Oct 29, 2008 - 2:16 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
I chipped my celica back in the summer and since then, I now have a 2"x2" square looking chip in my pass. side front 1/4 panel. It's started to rust and I was hoping to fix it the best way I can without spending a wad of cash. Here's what I plan on doing...
1) Sand off the rust with rough sand paper 2) Fine sand the rest when rust appears to be gone 3) Primer (1 coat) 4) Paint (2 coats) Is that it or should I do something more or what? |
|
Nov 1, 2008 - 1:36 AM
|
|
 Enthusiast Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) |
QUOTE (6G96GT @ Oct 29, 2008 - 12:16 PM)  I chipped my celica back in the summer and since then, I now have a 2"x2" square looking chip in my pass. side front 1/4 panel. It's started to rust and I was hoping to fix it the best way I can without spending a wad of cash. Here's what I plan on doing... 1) Sand off the rust with rough sand paper 2) Fine sand the rest when rust appears to be gone 3) Primer (1 coat) 4) Paint (2 coats) Is that it or should I do something more or what? It sounds good, but I would add more steps to the paint process if you would like the paint to look good. --------------------  |
|
Nov 1, 2008 - 9:16 AM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
like add more coats per set you think?
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 23rd, 2025 - 10:15 AM |