gearbox/trd shortshifter problems Options

[willirl]

basically, the damn thing doesnt feel like its going into gear at all, and it seems to swap between selecting a gear and not selecting at high rpm shifts.

any suggestions?

[Daftboy]

check the linkage cables...maybe you did not fully reconnect them.

This post has been edited by Daftboy: Nov 15, 2008 - 2:46 PM

[willirl]

i didnt install the shifter mate it came from japan with it.. is it the cables at the bottom of the shifter aye?

[Daftboy]

when you buy the short shifter it comes with a assembly and knob....there are four bolts that you need to unblot to take out the old one. There are also 2 shifter linkage cables i believe that are clip to it which is what controls the shifting to other gears. Just make sure that the cables are secure...post a picture of what you mean if you want so i can see what you mean .

[willirl]

cool man thanks ill do that in the morning (its 9pm here), thanks!

[blu94gt]

If I remember correctly aren't there spacers that go under the shifter assembly at each of the 4 bolts to raise the thing up? It's been a long time since I installed mine.

[97celiman]

ya there are, you remove the stock ones with the assembly, also we used the stock shift linkages/cables etc....works fine