7AFE powered GO-KART!, What do you guys think? Options

[richee3]

As several of you know, I recently parted out an ST. Well, as it turns out, the 7AFE and it's automatic transmission are in incredibly low demand Who knew that when someone pulled the 7AFE out that they would want to put something more powerful back in??? So that leaves me with a 7AFE and trans sitting in my garage. I have an uncle who happens to be an excellent welder and has a LOT of scrap metal sitting around. So after reading some of the more recent threads on here, namely the one Exterior Styling where gokarter put a rubber lip in his front bumper. Everyone starting talking about how the lip matched his name. I started thinking... Celica, go-kart... Celica, go-cart... What if I bought a few supplies, and had my uncle build me a frame (with a kick-a** roll cage hahahaha) and mount that 7AFE on it? It would be heavy, yes, but it would be the most BA go-kart in Southern Illinois. 110 HP isn't very much in a Celica, but it'd be massive overkill on a one-off go-kart. So do you guys think I should do this? And if so, how would I do it? Keep in mind that I do still have the transmission, and I'm not sure whether I should use it or not. So... Tell me!

[stetsonaw]

do it! and make this your progress thread. i don't have any ideas though sorry.

[block]

do it. my brother in law is building his go cart with a b16 motor. he's almost done, just need to do some suspension work. should be a fun project!

[RickJamesBish]

Sounds like a sick idea...probably burn rubber like crazy if you do it right.

[richee3]

Alright, 3 votes of yes. That's good enough for me Might as well try it, right? I can always just stop what I'm doing and find something else to play with lol. I think I'll go with Stetsonaw's idea and make this my progress thread. But it may be a little bit before I get started. In the meantime, does anybody have any good ideas of how to go about doing this right? Block, you'll probably be getting a lot of PM's from me lol. And your brother-in-law is building one with a B16? That's crazy! His will definitely smoke mine when all is said and done.

[Hanyo]

Do it if you can.

Try to keep it as low tech as possible.

[block]

Alright, 3 votes of yes. That's good enough for me Might as well try it, right? I can always just stop what I'm doing and find something else to play with lol. I think I'll go with Stetsonaw's idea and make this my progress thread. But it may be a little bit before I get started. In the meantime, does anybody have any good ideas of how to go about doing this right? Block, you'll probably be getting a lot of PM's from me lol. And your brother-in-law is building one with a B16? That's crazy! His will definitely smoke mine when all is said and done.

to get started, you need a lot of good welding lol. think of what your base go-kart will look like and start from there. my bro in law used 4" thick metal bars. he's a honda guy so he used a lot of parts from hondas to build his go-kart.

[richee3]

I really don't have a lot left except the motor and trans, so using Toyota parts won't really be an option for me And already, you guys have said stuff I didn't think about, like suspension.

[RickJamesBish]

So how's it going to go with the transmission? I'm thinking just do a one or maybe two-speed, not like you can really tap into power if you have too many gears, that'll just result in wheel spin.

[Hanyo]

I really don't have a lot left except the motor and trans, so using Toyota parts won't really be an option for me And already, you guys have said stuff I didn't think about, like suspension.

if you make it into a on-road kart you wont need suspension.


but if you make it into an off road machines i would probably source parts from an ATV. But this would make your cart building 20x more difficult.

[block]

make an outline of what you want your cart to look like. make sure you have enough room for tranny, engine, suspension, etc. you have to be think hard here and measure a lot. my inlaws had theirs built in a week. but they've slacked on the suspension plus it was cold (october). my inlaws have their b16 in the rear. looks like of like a midengine gokart haha. plus i think they made it an automatic...dont remember. ill check up on things to let you know more info

[playr158]

i'll have to say is you've already been pwned by the Chevy V8 bar stool

[richee3]

^^^ Of course I have lol. I've also been pwned by Block's in-laws. Come on, I'm using a 7A here hahahaha. It's BA as far as go-karts go, but as far as crazy go-karts go, it's pretty tame lol.

[njccmd2002]

i was thinking this today, but with smaller engine...

go for it.

[jdg371]

Ive seen a really good welder put together a V8 gokart.. great on the straights.. horrible on the turns.. also, it was longer than a civic.

[97celiman]

check out the manswers episode when they showed what you can put a hemi into...zamboni!!!

[95st-celica]

hmmmm...i have a spare 7a with a 5 speed laying around as well...and a hell of a welder for a step-father...good idea...this thing will run forever...its toyota powered!

[richee3]

hmmmm...i have a spare 7a with a 5 speed laying around as well...and a hell of a welder for a step-father...good idea...this thing will run forever...its toyota powered!

Odds are yours will come together before mine if you go for it. I'm jobless and underfunded for such an undertaking right now plus a 5 speed go-kart would be a lot more fun lol.

[njccmd2002]

RWD for drifting fun

[richee3]

I just had another thought... I have seats and seatbelts left over from the partout too. So that handles my seating arrangements, unless you guys can think of something better??? NJCCMD, my thoughts exactly Maybe it won't be that great since it isn't too powerful, but my goal here is as light as possible.