im bored heres a few teaser pics ;), *update* now with dyno chart! Options

[iburnslabs]

Should be running in the next month or so





This post has been edited by iburnslabs: Sep 14, 2009 - 7:37 PM

[AnaXyd]

Wow, that looks amazing!

Do you have some specs? And where did you get the koyo radiator?

[iburnslabs]

sure here is a "quick" mod list, because i have so much i have done im sure i forgot some

Engine

gen2 USDM block built with Weisco coated pistons, 9:1
Eagle rods
ACL Race coated bearings
All ARP hardware mains, head studs etc
bottem end balanced blueprinted etc etc.
Stock Gen 3 Head
Moroso Oil Pan
GT35r kit .63 a/r
Tial BOV
Tial WG
Custom I/C piping done by a friend 3" charge piping 2.5" hot side piping
big FMIC (forget what size) barely clears everything hehe
Q45 throttle body

Fuel

Custom (done by me!) Twin in tank walbro 255 pumps <~~~ pain in the BUTT!
-8 feed
Wolfkatz rail
RC 1200 CC injectors
aeromotive FPR

Ignition
Stock! <~~ seems to make good power, ill upgrade as needed

Tuning

AEM (Custom adapter harness made by DR Tweak! thanks!)
AEM sensors etc...

cant think right now... im sure there are million more things .. ill update it later






O and why so much fuel? its set up for E85, the goal is to make 500-600 AWHP on this setup, nitrous might be in my future ugh.. not sure where the turbo will max out at but seems like a bigger one wont clear the tranny. goals for this year are minimum 500 AWHP (ill be happy with that for now)

O sorry and I got the koyo from my distributor

This post has been edited by iburnslabs: Sep 14, 2009 - 3:18 AM

[BBoYRuGGeD]

wow very nice. digging that intake manifold. i take it ur not selling this beast nemore?

-bboy

[boosted95]

so now you have 2 celicas? or did the black gt4 conversion start life as a red 94 gt? ither way looks wild, what spring are you using in the tial bov? i just installed a 50mm on a 7m supra with a 60-1 turbo and some other goodies and the 8lb spring wasnt strong enough to hold shut at idle... just wondering

[iburnslabs]

honestly i havent even started this motor yet and i dont remember what spring is in it. It wont be running any less than 20psi so ill prob need a diff spring anyways after i tune it (ill tune from the ground up from 5psi ish. .... and this is a different car one of the reasons i need to sell the black one to finish this one up!

[supershannon77]

Is this the car your selling or another project?

If its another project why not do it on the awd car you already own?

[lagos]

Is this the car your selling or another project?

If its another project why not do it on the awd car you already own?

Hint, the black car was not his only awd one.

[boosted95]

Is this the car your selling or another project?

If its another project why not do it on the awd car you already own?

Hint, the black car was not his only awd one.

that greedy bastard!!!!

jk

[iburnslabs]

Is this the car your selling or another project?

If its another project why not do it on the awd car you already own?

Hint, the black car was not his only awd one.

that greedy bastard!!!!

jk

hehe, notice in my first post i said im going for upwards of 600 AWHP hehe

this is a different project, and im not greedy! Im trying to sell one of them so someone else can have fun! I cant drive them both lol

[supershannon77]

lol 2 awd celicas wow...good thing your sharing the wealth.

[boosted95]

Is this the car your selling or another project?

If its another project why not do it on the awd car you already own?

Hint, the black car was not his only awd one.

that greedy bastard!!!!

jk

hehe, notice in my first post i said im going for upwards of 600 AWHP hehe

this is a different project, and im not greedy! Im trying to sell one of them so someone else can have fun! I cant drive them both lol

id love to see you roll up to an evo!!! where did you get your clips from, im in the market for both front and rear clips? also, is it a true st205 conversion or are you using st185 clips as a rear platform?

[iburnslabs]

if you are talking about my black car, it is converted with all JDM gen3 st205 parts front to back. why buy the clips? just buy my car! it will save you alot of hassle and you can sell your car to make it even cheaper the above picture of my engine bay is not an st205 conversion. its a different car altogether. just a fun project ill post pics of it when its done in a few months

This post has been edited by iburnslabs: Mar 3, 2009 - 8:58 PM

[boosted95]

if you are talking about my black car, it is converted with all JDM gen3 st205 parts front to back. why buy the clips? just buy my car! it will save you alot of hassle and you can sell your car to make it even cheaper the above picture of my engine bay is not an st205 conversion. its a different car altogether. just a fun project ill post pics of it when its done in a few months

my hp is built not bought... but yes, i want it bad
well...
not the gt4 exterior too flashy

nice car tho, good luck on its sale and build

[presure2]

looks good man, cant wait to see it on the dyno!

[iburnslabs]

thanks, ya im excited to see what kind of power I can get on E85 out of this gt35r, i hope it will at least get me 500awhp, i think it will tho from looking at others on E85

[d0w0rkS0n]

thanks, ya im excited to see what kind of power I can get on E85 out of this gt35r, i hope it will at least get me 500awhp, i think it will tho from looking at others on E85

updates??

[iburnslabs]

none yet, been so busy havent had time to finish her up

[celicaST]

awesome! i live up in fort collins, have to check this out sometime. i know this car... hows it like shifting?

This post has been edited by celicaST: Mar 25, 2009 - 7:26 AM

[iburnslabs]

come down and help me finish it up lol