clutch or slave cylender?, was fine yesterday Options

[Decalsondemand]

ok well i went to take my car to the car wash this morning and and my clutch petal was really spongy and the petal has to come half way out before the clutch will engage....right away i checked for leaks and the fluid level and both were fine...i had full clutch yesterday so im hoping this isnt the clutch itself....any suggestions? how hard is the slave cylender to bleed if thats what i need to do? any help would be appreciated!!

This post has been edited by Decalsondemand: Mar 17, 2009 - 10:43 AM

[presure2]

press the pedal too the floor, and hold it, while someone else watches the slave cylinder. while your holding the pedal down, if the slave moves back in, the master is bad. when you press the clutch, if the slave dont move, its the slave.

[Decalsondemand]

i have drove the car and there is no slippage it drives and shifts fine just doesnt grab until the petal is out about 1/4 of the way