Help!! Auto to Manual issues Options

[bccentaur3]

So I just buttoned up my sisters auto to manual swap on her celica. Everything was fine until I saw that there was little play in the slave cyclinder pushing the throwout bearing fork. SO I decided to bleed the clutch fluid. The clutch fluid reservoir is full, yet I get ZERO play in the slave cylinder now. So I push the rod of the slave cylinder in and fluid squirt out. Tighten the slave cylinder nipple and pumped the clutch a million times, and had someone press the clutch all the way down and released the nipple and NO fluid comes out. Whats going on? Is the master cylinder busted?

I need this issue fixed along with the timing issue I have.

[rjbibeau]

same problem as my ex g/f's mr2....changed the master and she was all good

[bccentaur3]

Thanks Rick... I figured it was the master cylinder.

[rjbibeau]

no problem Will...always best to get a 2nd opinion

[cheeco]

it took me like 20 times of having someone rapidly pump the clutch pedal an hold it. then open and close the bleeder to get the system fully bled

[bccentaur3]

we've done it a billion times yet nothing.

[95celgt]

yea i just did the swap, and it took a LONG time but then the slave finally shot out something blocking the bleeder, and i cycled fluid 2 times through it untill nothing but clean fluid came out...if i were you i would get both the master and the slave so you dont have to bleed system twice.