C-ONE Front Bumper 3/4 view and profile Options

[Demios]

Hi, im a new 6gen Celica owner, and im planning to buy a C-ONE body kit, can someone give me a pic of the front bumper seen in 3/4 and laterally? i cant understand how long is the lip. Thank you

[reko]

Lip ends up like an inch or so in front of the bumper...

Here's a pic of mine... you'll see, it's not long at all

http://img232.imageshack.us/my.php?image=15218674.jpg


This post has been edited by reko: Apr 30, 2009 - 11:39 AM

[Demios]

Thanks Im sorry, i was in greece XD

[trdproven]

the lip or the full bumper, they sell both.

[vi-tuyen]

will the this kit fit on 95 st? or do i have to do some mod for it to fit?

[TerBeau]

You will have to fabricate you crash bar because it is in the way also you will l need to cut out your headlight holes alittle so it will fit around your lights depending on your material

[Temporary-Failur...]

What is the lmeasure between those two yellow lines (so how long is the green one?) on C-ONE -bumper?

[TerBeau]

I'd say like six inches something like that my car is at my shop getting my new z3 fenders on and ****

[Demios]

You will have to fabricate you crash bar because it is in the way also you will l need to cut out your headlight holes alittle so it will fit around your lights depending on your material

Uh, can u show me a pic? i cant understand exactly wich mods my car needs

This post has been edited by Demios: Jun 5, 2009 - 2:03 PM

[TerBeau]

well i would if i knew how to put up pics. but take that pic up top, you see how those headlights fit in the cutouts on the bumper? those may have to be cut. my headlight wholes sat back too far so had to measure the stock bumper from the inside to the out side of the bumper and measured that on my new c-one. then cut them out. also the other prob is i had was the main crash bar is like two inches thick so you might want to get that cut thinner or buy a 1/4 in thick steel to put there if your in a state were you have to have it for inspection. im no pro at explaining but when i tried to put mine on the stock crash bar was not allowing the bumper to sit back all the way. im assuming that in that pic above they have no crash bar because they have an innercooler there. and this is also what a a body shop (delights customs) told me.

[xlee]

do you need crash bumper for this? i also have a regular celica gt. can i just put the c-one on without other parts? do i also need gt4 hood?

[celitrd]

you need a jdm gt4 crash bumper for the c-one bumper to fit. i have a c one bumper on and running without the crash bar

[TerBeau]

you need a jdm gt4 crash bumper for the c-one bumper to fit. i have a c one bumper on and running without the crash bar

thats the easy way. but were i live thats not going to pass inspection. pa is so gayy. lol what is different about the gt4 one? smaller or is it acually ment to fit that bumper

This post has been edited by TerBeau: Jul 2, 2009 - 8:55 AM

[Demios]

hmm don't u think that an esier and maybe better way is to create new crash bumper?(assuming that u're talking about the bar just behind the bumper, that links the fenders)
Maybe using 2 steel pieces as a roll bar

like them: http://www.rhdjapan.com/images/product/312...ormal/Image.jpg

just screwed where the crash bar was.

Lighter and stronger.

[Demios]

Ah, another question:

There are 2 version of this bumper:
the GT-FOUR one
and GT one

The first is made to fit on the GT-FOUR with his hood, the other on the GT, with its own hood too. All this versions needs this mod? Maybe in C-ONE they made the GT version to fit withour needing the GT-FOUR crash bar. Someone knows something?