Flush Fit Wheel Fitment, Offsets for Flush Fitment which is Proper Fitment Options

[Harold_Fastwaker]

1.5" converted into mm???

nice!


and that is roughly 38mm.

[HectortheRican]

So my wheel is 7.5" and 45mm offset. the chart says +15mm front and -2mm rear, does that mean I need 30mm spacers on front and 47mm rear?? I'm just trying to understand, I'm not sure I'm doing the math right. That seems a little big

This post has been edited by HectortheRican: Aug 3, 2010 - 12:28 PM

[sunwukongg]

just something i keep forgetting to post

http://fatlace.com/hellaflush/

Harold, you down???
If I see your car on fatlace i'll get my car up there too

I was going to submit my car once my exhaust is finished and I am fully happy with my stance. So hopefully it will be on there shortly.

get your car up there already!

[diegohiga]

Ok I have question.. Someone might asked this before but my only access to 6gc is thru my phone and I can't serch to much from here cause is slow.. Ok my question is... I want my rear wheels to look flush! I have 18x7.5 35 offset and I already rolled my fenders... The chart says I have to get 37mm sapcers? That's = to 1.5 inches spacers.. Is that right? And I would need to get the camber bolts?

[block]

this wheel flush thing is confusing me. LOL....i've been reading so much and it's still confusing! maybe im just not getting this at all...

[easternpiro1]

this wheel flush thing is confusing me. LOL....i've been reading so much and it's still confusing! maybe im just not getting this at all...

x2 im so confused. im interested in this thread because i like the deep dish rims and want some for my celica but i know you have to have certain measurements/offset which is confusing to me...

[block]

tell me about it bro i just want my wheels flushed lol

[HectortheRican]

this wheel flush thing is confusing me. LOL....i've been reading so much and it's still confusing! maybe im just not getting this at all...

x2 im so confused. im interested in this thread because i like the deep dish rims and want some for my celica but i know you have to have certain measurements/offset which is confusing to me...

What size are your wheels? diameter, width, offset

[easternpiro1]

right now i have some 7.5 widths on there, but i plan on buying some new ones towards the end of the year. i want some rims with a 2-4 inch lip i like the look just not sure how that applies to the dimension of the rim.

[HectortheRican]

right now i have some 7.5 widths on there, but i plan on buying some new ones towards the end of the year. i want some rims with a 2-4 inch lip i like the look just not sure how that applies to the dimension of the rim.

You just need to find out the offset & width of the rim you want and use the chart to do the math for spacers Like me for example, I have a 7.5" wide wheel with a +45mm offset. According to the chart, I need a +15mm in the front, and -2mm in the rear, which means I'll need a 30mm spacer up front and a 47mm in the rear (which is crazy, that's too big)

[whatthe]

http://www.youtube.com/watch?v=IBWeQHZy_nw...ture=grec_index

Great video that gets to the point of pros and cons of spacers

[HectortheRican]

Great video!!

[chacha]

so do we use hub centric spacers or the lugs spacers?

i have 17x7.5 35mm offset...

option with roll or not?


how did you guys do the math....i want to be hell flush too.

This post has been edited by chacha: Sep 23, 2010 - 9:08 PM

[whatthe]

HUB centric

[HectortheRican]

so do we use hub centric spacers or the lugs spacers?

i have 17x7.5 35mm offset...

option with roll or not?


how did you guys do the math....i want to be hell flush too.

The chart is on the 1st page of this thread.

[chacha]

i saw the first page...with mines...since the rims are the same....front and rear...confirming i need 15mm?

[HectortheRican]

i saw the first page...with mines...since the rims are the same....front and rear...confirming i need 15mm?

Nah. The fenders are wider in the back so you need more offset in the rear. Proper offset for 7.5" wide is +15mm front, -2mm rear

[chacha]

thanks...so i would ask for a -2mm rear hub cent spacer and +15mm hub cent spacer.

[HectortheRican]

thanks...so i would ask for a -2mm rear hub cent spacer and +15mm hub cent spacer.

Nononononono! That would do nothing lol
Your wheels are +35mm offset, all 4. So fronts need a 20mm spacer to bring it down to +15mm and rears need a 37mm spacer to bring it down to -2mm. Get it? It took me a while too lol

This post has been edited by HectortheRican: Sep 24, 2010 - 12:06 AM

[chacha]

man...hahaha....craziness...reading didn't seem like you had to be a rocket scientist to figure it out, BUT the end results makes you feel like a fool; i ended with some many question marks on my face.

THANKS for the clarification Hec...

This post has been edited by chacha: Sep 25, 2010 - 3:01 AM