LED fog/turn signal, PICTURES POSTED!!! L@@K!! Options

[SinisterSinner]

[CLICK HERE] to play the video this is just a slideshow showing the Pictures of a project I did a couple of months ago it was requested by some users, and I hope oyu guys enjoy it, even tho the pictures dont look as good as in person, but the video is a lot worst, this is only the foglights they dont blink, but my next project is the turn signals so that I will remove the whole stock turn signal back cover and bulb, thus reducing a couple of grams of the total weight of the car, but a lot better than that reducing the watts that are drained from the battery, making the battery last longer when I have all my lights on lol, but it will look a lot cooler also, I'm getting LEDs that match my car's color
NOTE in the video I included some photos of the vinyl tribal on the rear and the custom made LED bulbs for tthe gauges, everything is perfect, but for some reason the Gas light stays on at all times





This post has been edited by SinisterSinner: Dec 5, 2009 - 11:31 PM

[SinisterSinner]

*bump* wow there were so many people PM ing me for this and now no one would watch ti?

[MrAyasli]

LED turn signals?

Can you post some pics up.

[SinisterSinner]

LED turn signals?

Can you post some pics up.

Dude click on the youtube link that says [click here] i don t know how to upload the pics but ill try

[SinisterSinner]

?haha!! i KNEW MY OLD MYSPACE WEBSITE WAS GOOD FOR SOMETHING!!!!, FREE PICTURE HOSTING! LOL, hope you like it!
NOTE THE TURN SIGNAL AREN'T DONE, i HAVE NOT RECIEVED THE *****[COLOR, NOT A bad word] LEDS YET!, YOU GUYS WILL HAVE TO WAIT MORE FOR THAT , ALSO INSTEAD OF SILICON TO STICK THE LEDS ILL USE JB WELD, STRONGER WEIGHTS LESS, AND ITS LESS MESSY + instead of the leds pointing down I will make them pointing up, or at least try to point them up I will keep you guys updated and KEEP ME MOTIVATED, pelase!

[MrAyasli]

Post a tutorial if you can.

[MrAyasli]

.

This post has been edited by MrAyasli: Nov 30, 2009 - 1:27 AM

[MrAyasli]

..

This post has been edited by MrAyasli: Nov 30, 2009 - 1:27 AM

[SinisterSinner]

I'm sorry, but lately I have been really busy, with the new job and everything, I just ordered the drivetrain/drive shaft/ axles or what ever makes the front wheels move lol, that has 2 rubber pieces, and when I get them I'm going to have to squeeeze some time to put them on with my pops, both brand new.
and about the LEDs I just opened the housing using the oven method, measured distance between leds, soldered every LED 1 by 1, made the holes on housing with solder gun, stuck the LEDs inside, connected them all toguether paralell wired, and connected them to the white and the black wires off the turn signals I think it was those colors or you can test with 1 led to make sure wich are the right wires, because the turn signals have 3 wires, 1 bliking, 1 for just on, and 1 ground, just test to get the right ones, also you will need to cut some of the inner edges of the housing to be able to close back, and before that youll need the seal the LEDs with sillicone, but if you want to change everything to LEDs I would recomend JB Weld it. hope this helps you, if not Ill answer any question when I get time and try to aid you

[CelicaST_CALI]

I'm sorry, but lately I have been really busy, with the new job and everything, I just ordered the drivetrain/drive shaft/ axles or what ever makes the front wheels move lol, that has 2 rubber pieces, and when I get them I'm going to have to squeeeze some time to put them on with my pops, both brand new.
and about the LEDs I just opened the housing using the oven method, measured distance between leds, soldered every LED 1 by 1, made the holes on housing with solder gun, stuck the LEDs inside, connected them all toguether paralell wired, and connected them to the white and the black wires off the turn signals I think it was those colors or you can test with 1 led to make sure wich are the right wires, because the turn signals have 3 wires, 1 bliking, 1 for just on, and 1 ground, just test to get the right ones, also you will need to cut some of the inner edges of the housing to be able to close back, and before that youll need the seal the LEDs with sillicone, but if you want to change everything to LEDs I would recomend JB Weld it. hope this helps you, if not Ill answer any question when I get time and try to aid you

You dont know it is but ur gonna DIY?hmm hahaha



Leds look good

[SinisterSinner]

thanks bro , im not, because its better with pics, ill try to remember to take some pics while in the process of adding the dual color LED turnsignals , for you guys . I spent 1 week making those and driving with the turn signals without covers lol, so they were hardly noticeable lol. I'll try to make temporary lights for tha front and the back, so whichever light I mess with I wont have to put it on or take it out throught the process, ill buy the pack of like 12 yellow trailer lights to do that 1st, before taking anything out, that way I will save more than if I get a ticket for driving with no taillights lol

oh and for those of you that want to know which kind of leds i used , they are 20,000 mcd white leds

[SinisterSinner]

Could any body help me, after my LED comversion bulbs my gas light stays on all the time even with a full tank help?

[NewOrleans]

damn that looks tite. it def. gonna be a project for me soon