automatic and manual tranny bolts (5sfe), are they the same? Options

[Akimbo]

Are the bolts that hook the mounts and brackets to the transmission the same for an automatic and manual GT?

[Akimbo]

to be more specific, i dont mean the bolts that attach the brackets/mounts to the tranny, i mean the ones that attach it to the motor or wherever else...

[ETNRIDER]

(I know I'm bringing this waaaaay back from the dead but I searched and found nothing but this)

First I'm nearly 100% sure the blocks are the same since it is really common to swap the 5 speed in and it's not in the write up to drill and tap the block for the swap.

Anyway on to my question,

What is the bolt sized used to mount the tranny to the block?
I bought a 5sfe and need to mount it to an engine stand.

Thanks all, I figured I would just add to this post instead of making a new topic!

[Mstoochn]

i went from a 5s auto to 5s manny to 5s e153 and used the same bolts the hole way through

hope that answers ur question

[ETNRIDER]

I bought a 5SFE spare motor since mine has 220K+ on it now and I need to know the size of the bolts so that I can get some to mount the motor to the engine stand.

Thanks though

[trdproven]

I'm not sure if all the auto tranny bolts are the same, i do not recall if 1 or some were a lil longer. IDK

[ETNRIDER]

The bolts are M12x1.25 not sure about the length but I needed 65mm to mount to my engine stand.