 Clutch bearing or master cylinder, Please help |
  |
 Feb 17, 2010 - 1:22 PM
|
 
|
|
Enthusiast  Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%)  |
So here is the problem. I can't put my car in gear and I was told That it is my clutch master cylinder or my clutch bearing. I can put it in gear but it is hard,also the clutch bearing makes a spinning noise. How could I find out which one it is without taking apart my tranny?
|
|
Feb 17, 2010 - 7:17 PM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
do you have clutch pedal pressure?
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
|
Feb 18, 2010 - 4:42 AM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
Yes, When I push in the clutch my car feels like I just hit the brake.(pushing me forward)
|
|
Feb 18, 2010 - 4:56 AM
|
|
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
if you have clutch pedal pressure then it isnt your master cylinder.
check if your shifter cables are stretched -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
|
Feb 19, 2010 - 11:00 PM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
My release bearing makes alot of noise when I push it in also.
|
|
Feb 20, 2010 - 3:23 AM
|
|
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
how old is it?? how many miles?
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
|
Feb 20, 2010 - 3:36 AM
|
|
 Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
It's either your throwout bearing or your clutch itself is about to go. It sounds more like it's the clutch itself. There's no way of checking the throwout bearing though w/out dropping the tranny, so just count on doing a clutch job. Get the whole clutch kit, it'll come with the throwout bearing. And don't be cheap, get your flywheel resurfaced while you're in there, it's the lamest thing people cheap out on and it WILL cause problems.
--------------------  |
|
Feb 20, 2010 - 2:33 PM
|
|
|
Enthusiast Joined Jun 10, '07 From Riverside, CA Currently Offline Reputation: 4 (100%) |
QUOTE (GriffGirl @ Feb 20, 2010 - 12:36 AM)  It's either your throwout bearing or your clutch itself is about to go. It sounds more like it's the clutch itself. There's no way of checking the throwout bearing though w/out dropping the tranny, so just count on doing a clutch job. Get the whole clutch kit, it'll come with the throwout bearing. And don't be cheap, get your flywheel resurfaced while you're in there, it's the lamest thing people cheap out on and it WILL cause problems. X2 --------------------  She's Alive...... Again!!! QUOTE (95CelicaST @ Nov 17, 2009 - 5:53 AM) QUOTE (SwissFerdi @ Nov 16, 2009 - 8:53 PM) QUOTE (95CelicaST @ Nov 16, 2009 - 11:51 PM) Sweet Jesus. You rang? Sorry, wrong number. :laugh: |
|
Feb 21, 2010 - 2:37 AM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
I have the clutch kit and I would rather sell the car then fix it... I have had this car four or five years now and I have done all the work to it myself. It is sad for me to see i go but it is bad luck for me. It has been hit three times now.(parked all three times.
 If you guys know anyone that might want it let me know and I will post the pictures of the car the way it is now.
|
|
Feb 21, 2010 - 11:24 AM
|
|
 Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
you selling it for cheap?
Might be interested This post has been edited by soulshadow: Feb 21, 2010 - 11:25 AM |
|
Feb 21, 2010 - 12:20 PM
|
|
|
Enthusiast Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%) |
What would you offer me for the car?
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 2:58 PM |