Today I.......................................... Options

[Keiri]

It connects from the lower part of the block up to a little port on the air induction hose in '96+ cars; my 99 is Cali-spec and has the exact same hose.

Really now? I had a '95 Cali Spec engine, but converted it to a '94 Fed Spec, and I have that hose on my car too

That was always my understanding Mike but I could be wrong. I'll check my '99 BGB once I get home.

[zfjohnson07]

wrecked my celica:

but i got this Friday:



and bought a 2003 mach 1 today

[kurt95gt]

What happen? You ok?

[Box]

wrecked my celica:

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!

[zfjohnson07]

Guy turned in front of me into the left lane and then at the last second he cut over on my steering rod is broke and control arm was bent so I'm hoping they total it. Guy said he never saw me

[Box]

Provided they total it, what're your plans?

[zfjohnson07]

Let them total it take the JDm tails off and radio and speakers and let them take it I'm done with celicas

[mkernz22]

Let them total it take the JDm tails off and radio and speakers and let them take it I'm done with celicas

I could use a lot of parts off that car man.
Like the rear brakes and other things I can't think of right now.

[zfjohnson07]

Well see idk what there gonna do

[chacha]

It connects from the lower part of the block up to a little port on the air induction hose in '96+ cars; my 99 is Cali-spec and has the exact same hose.

Really now? I had a '95 Cali Spec engine, but converted it to a '94 Fed Spec, and I have that hose on my car too

a picture if possible would be nice...mines a 94' and I followed it to the back where it connects to the block like you said, but as for the other tip, i don't know where the end would fit.


Z...sorry bout the lost, but Im glad you got something else in trade, if they total it, take the plastic trims in the back...ill take those from you and the driver side quarter window

This post has been edited by chacha: Dec 12, 2012 - 6:53 PM

[Keiri]

It connects from the lower part of the block up to a little port on the air induction hose in '96+ cars; my 99 is Cali-spec and has the exact same hose.

Really now? I had a '95 Cali Spec engine, but converted it to a '94 Fed Spec, and I have that hose on my car too

a picture if possible would be nice...mines a 94' and I followed it to the back where it connects to the block like you said, but as for the other tip, i don't know where the end would fit.


Z...sorry bout the lost, but Im glad you got something else in trade, if they total it, take the plastic trims in the back...ill take those from you and the driver side quarter window

I'll get you a picture in the morning Chacha.

[chacha]

Many thanks K, i can have a chance of now passing smog...i thought about just cutting the darn hose off so the smog guy can see it, lol.

[Keiri]

As promised, the first picture is how the stock routing goes:



Second picture, Toyota sticker certifying my GT is Cali-spec:



If you need anymore, lemme know.

[chacha]

thanks...i don't know how i missed that...many thanks...going to dmv to get my darn 2013 tag and reg.

This post has been edited by chacha: Dec 13, 2012 - 10:55 AM

[doctavic]

installed a new rear bumper, SS-III grille, and TRD badges

[mkernz22]

Bought four 20mm spacers. Hopefully that'll get my wheels far enough out so that they won't rub on the bottom hats of the struts lol

[Red123]

Received pair of Kenwood Kfc-p709ps. Great sound
http://www.amazon.com/gp/product/B003OEI7R...ils_o01_s00_i00

[Box]

Oi, is it bad I've gone to the extent of avoiding certain roads now? Still no luck on finding any seats.

[Box]

Today I remembered how great frameless door windows are in cold and damp conditions. I couldn't see until halfway back from the grocery store.

[mkernz22]

Inquired about possibly buying another parts car....hopefully I can convince the parents cause my dad already has two car sitting around.