Today I.......................................... |
Today I.......................................... |
Dec 17, 2014 - 2:59 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
that car has the wrong engine Says "I blew the engine so i bought another jdm full swap off ebay" in the ad. Not sure how accurate that is though. nope, needs a 2grfe!!! lol!!! Only if you do the wiring and get it to work with the E154F. Piece of cake I'm more of a pie person myself. -------------------- 2001 Miata LS 5-speed
|
Dec 17, 2014 - 4:40 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Noticed a puff of blue smoke on a cold start rings and valve seals in the future Very common in the GT's. It's just the valve seals. I wouldn't replace the rings unless you just really want them replaced. -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Dec 17, 2014 - 11:04 PM |
|
Enthusiast Joined Dec 3, '13 From Missourah Currently Offline Reputation: 0 (0%) |
Drained the ole whiney transaxle upon hearing some new noises of metal scraping and pronounced WHIIIIIIIIRRRRRRRR noises. The oil coming out looked a little milky but no chunks. I let it drain across a little rare-earth magnet and found nothing.
Then I took the magnet and just kind of waved it around in the top fill hole and all this fuzzy stuff jumped onto the magnet. Filled it back up and drove it a while more. It was just kind of loud when there was a load on the transmission. But after another 40 miles it began to make some violent bang and clunk kind of noises. At this point I just pulled over and called the tow truck to take it straight to my friends shop. Luck me there's a really nice one in the part out thread. and after all I just saved my Mom $500 from not getting ripped off by that guy fixing my sisters car. ...unfortunately she won't see it that way. -------------------- Bust a Deal; Face the Wheel.
|
Dec 18, 2014 - 2:15 AM |
|
Enthusiast Joined Dec 9, '13 From Melbourne, Australia Currently Offline Reputation: 2 (100%) |
Finally!!
After much peer pressure by JoshM and Timmyface I got these babies Sadly the nuts that came with it don't fit. So i went out and bought new nuts but then it started raining Soo.. install pics soon This post has been edited by RoadRage: Dec 18, 2014 - 2:15 AM -------------------- |
Dec 18, 2014 - 6:15 AM |
|
Enthusiast Joined Apr 21, '13 From YYC Currently Offline Reputation: 1 (100%) |
My insurance expires on Dec 29th, and so I received a notice in the mail about a renewal, as well as the AirCare test that I need to get done (emissions).
When I insured my car for the first time last December, I was told about the AirCare program, but my car got a free 1yr pass due to it being bought used. I figured that hey, AirCare will be done and over with by the time I need to renew my insurance. Nope. I had to get the test done to cover my ass for 2 days! Regardless, I went into a testing station, watched as the female struggled to drive the standard car to keep the revs on point with the computer system, only to have the male co-worker step in to complete the job. My car, being bone stock from it's creation (aside from air intake & wheels), passed with flying colours. I have a suspicion that my broken flex joint may have had something to do with the lower readings of the toxic fumes, but meh! Also, I took my car into the insurance inspection site to get my claim/estimate. I was in the waiting room waiting for the receptionist to call me up to do any kind of paperwork that I thought needed to be done in this situation, all the while watching my car get inspected in the garage. Apparently I didn't have any paperwork to sign or anything, so I eventually walked out to the garage to enquire about what the man was taking all the pictures and opening my hood and taking pictures that were not related to my recent fender-bender. I was a little nervous since I have aftermarket HIDs installed, and JDM tails installed (non-DOT approved). Luckily after talking with the man, he was only taking pictures to cover their ass, as well as the repair shop's ass, if I were to claim any additional damage done to my car after the fact. It was a win/win day for me on Monday with regards to insurance and carbon emissions. Oh yes, also, after visiting the repair shop, I met the mechanic who will be working on repairing my car, and he said that he's going to pop out the palm-sized dent on the opposing fender for me despite it not being related to my fender bender. Bonus! |
Dec 19, 2014 - 3:37 PM |
|
Enthusiast Joined Aug 5, '09 From West Texas, USA Currently Offline Reputation: 20 (100%) |
-------------------- |
Dec 19, 2014 - 4:15 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Woooo!!!!! BEAMS-tastic!!!
Now get to it! -------------------- 2001 Miata LS 5-speed
|
Dec 19, 2014 - 4:34 PM |
|
Enthusiast Joined Aug 5, '09 From West Texas, USA Currently Offline Reputation: 20 (100%) |
Woooo!!!!! BEAMS-tastic!!! Now get to it! I've still got to get some parts for it such as engine mounts, timing belt/waterpump and other maintenance items. It's going to be a longer process but hopefully it will go well. I've also got a good amount of stuff I can sell off it, and make some of my money back. This post has been edited by 1994Celica: Dec 19, 2014 - 4:35 PM -------------------- |
Dec 19, 2014 - 6:13 PM |
|
Enthusiast Joined Apr 12, '13 From Bulgaria Currently Offline Reputation: 53 (100%) |
Today I
-------------------- |
Dec 21, 2014 - 3:47 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Woooo!!!!! BEAMS-tastic!!! Now get to it! I've still got to get some parts for it such as engine mounts, timing belt/waterpump and other maintenance items. It's going to be a longer process but hopefully it will go well. I've also got a good amount of stuff I can sell off it, and make some of my money back. It'll all be worth it though. -------------------- 2001 Miata LS 5-speed
|
Dec 21, 2014 - 5:34 PM |
|
Enthusiast Joined Aug 5, '09 From West Texas, USA Currently Offline Reputation: 20 (100%) |
Woooo!!!!! BEAMS-tastic!!! Now get to it! I've still got to get some parts for it such as engine mounts, timing belt/waterpump and other maintenance items. It's going to be a longer process but hopefully it will go well. I've also got a good amount of stuff I can sell off it, and make some of my money back. It'll all be worth it though. I'm hopping it is. I also need to find out what sort of exhaust set up I want. Today I ordered the timing belt, and valve cover gaskets. This post has been edited by 1994Celica: Dec 21, 2014 - 5:36 PM -------------------- |
Dec 21, 2014 - 8:21 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Whatever you have now should work.
-------------------- 2001 Miata LS 5-speed
|
Dec 21, 2014 - 8:34 PM |
|
Enthusiast Joined Aug 5, '09 From West Texas, USA Currently Offline Reputation: 20 (100%) |
Whatever you have now should work. Yeah I know but I'm debating if I want to go aftermarket or not. -------------------- |
Dec 22, 2014 - 4:17 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
As long as you promise to not make it sound like a bumblebee.
-------------------- 2001 Miata LS 5-speed
|
Dec 22, 2014 - 4:46 PM |
|
Enthusiast Joined Aug 5, '09 From West Texas, USA Currently Offline Reputation: 20 (100%) |
As long as you promise to not make it sound like a bumblebee. Don't worry I won't. I'm so picky when it comes to exhaust sounds. Most aftermarket 4 cylinder exhausts don't sound door in my opinion. I really don't want to be that guy with the loud 4 cylinder that sounds like a fat man farting.
-------------------- |
Dec 22, 2014 - 5:25 PM |
|
Enthusiast Joined Dec 3, '13 From Missourah Currently Offline Reputation: 0 (0%) |
Went down and picked up my new transmission from a small local salvage yard. Said they rescued it from a GT that had been really nice looking but got wrecked in the back. Hopefully the synchronizers are in good shape.
I was going to buy the one KAOS has in his part-out. It's an S54 with only 27,000 miles on it, if I lived closer it'd be a super deal. -------------------- Bust a Deal; Face the Wheel.
|
Dec 22, 2014 - 6:27 PM |
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
As long as you keep the cat and a resonator just about any muffler should be ok. I like to use baffled mufflers with four-cylinders and most six-cylinders, as they remove the harsher frequencies. The only thing I'll use straight through mufflers on is a V8, and even then certain V8's have a better sound with a baffled muffler. Right now the Firebird has the factory dual exhaust with some (likely blown out) glass-packs, and even though it sounds good it's ridiculously loud. So having to decide on what I want to do myself in that regard. MagnaFlow makes a good muffler for a fair price, and they have straight through, glass-pack, and baffled options. My brother has a MagnaFlow XL muffler on his Genesis Coupe 2.0T and it sounds pretty good for a four-cylinder.
-------------------- 2001 Miata LS 5-speed
|
Dec 23, 2014 - 9:08 PM |
|
Enthusiast Joined Dec 21, '14 From Puerto Rico Currently Offline Reputation: 0 (0%) |
Today I discovered that my cars engine coolant temp sensor was the cause of my car shutting off at idle, would start up fine in the morning then after running for a while would shut down and would start only after cooling down.Before this it wouldn't start at all and I took out the ecm and had to replace a burnt capacitor and repair an open trace on the pc board,everything is back to normal. yessss!
|
Dec 29, 2014 - 5:13 AM |
|
Enthusiast Joined Apr 21, '13 From YYC Currently Offline Reputation: 1 (100%) |
Happy Holidays!
My clutch blew. (it's probably still the stock clutch). I don't even know where to begin looking at what are my possibilities for replacement clutches are. |
Dec 29, 2014 - 6:53 AM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
https://www.facebook.com/photo.php?fbid=749...e=1&theater
im shocked its for sale, send it to a good home. the owner is a really nice guy! -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Lo-Fi Version | Time is now: November 29th, 2024 - 1:16 PM |