 Poly Control Arm Bushings, Help with install |
  |
 Jun 10, 2010 - 6:50 PM
|
 
|
 Enthusiast  Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%)  |
Got the old bushings out but can't get the new ones in.... does the inner ring get knocked out or is it one solid piece??
 
-------------------- Breaking Axles...
|
|
Jun 10, 2010 - 7:36 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I think I left the ring in with mine, we just cut then burned out the old rubber, then used a vise to squeeze the new bushings in.
-------------------- |
|
Jun 10, 2010 - 8:28 PM
|
|
 Enthusiast Joined Jul 3, '09 From UT Currently Offline Reputation: 14 (100%) |
I used an air chisel both ways. I couldnt get them to fit into a hydraulic press, so i put a slab of metal on the bushing to even out the pressure and chiseled them in.
They ride nicely. Good luck and enjoy. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 6:52 AM |