How can I get this off? |
How can I get this off? |
Aug 8, 2010 - 2:12 PM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
When I first got her, it was just a black strip across the rear window. But that was in the fall/winter. Now it's summer and the blazing Texas sun cracked it all up and I want it gone. I was thinking a razor blade, goo-gone, and LOTS of wax on/wax off but I wanna see if you guys have an easier way. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Aug 8, 2010 - 2:23 PM |
|
Enthusiast Joined Jul 10, '08 From Tampa, FL Currently Offline Reputation: 8 (100%) |
Razor blade + heat gun (don't get too hot or you bust your window). After the worst is removed, just clean the residue with thinner or alcohol.
-------------------- '94 ST
|
Aug 8, 2010 - 2:25 PM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
Razor blade + heat gun (don't get too hot or you bust your window). After the worst is removed, just clean the residue with thinner or alcohol. I don't the slightest clue how to use a heat gun, dude. I don't even know where to get one lol -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Aug 8, 2010 - 7:36 PM |
|
Enthusiast Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%) |
walmart. or else use a hair dryer lol.
-------------------- |
Aug 8, 2010 - 9:00 PM |
|
Enthusiast Joined Jan 27, '09 From New Orleans Currently Offline Reputation: 4 (100%) |
straight razor after spraying it with some water. it will take a little time. but it will come off clean
-------------------- |
Aug 8, 2010 - 10:20 PM |
|
Enthusiast Joined Nov 5, '09 From Nashville Currently Offline Reputation: 0 (0%) |
ummm
use a hair dryer to heat it up then pour some goo gone then use some floss or fishing line i wouldnt use a razor blade but u can if you are careful with it its gonna take a bit of time and some elbow grease either way oh and heat it up every so often but make sure any adhesive remover is dry cause it could catch fire This post has been edited by thisguy18: Aug 8, 2010 - 10:21 PM |
Aug 9, 2010 - 12:43 AM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
ummm use a hair dryer to heat it up then pour some goo gone then use some floss or fishing line i wouldnt use a razor blade but u can if you are careful with it its gonna take a bit of time and some elbow grease either way oh and heat it up every so often but make sure any adhesive remover is dry cause it could catch fire Pour it how? just, over it? straight razor after spraying it with some water. it will take a little time. but it will come off clean I'm going to try this first since it's just water -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Lo-Fi Version | Time is now: January 16th, 2025 - 1:54 PM |