6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Clutch on 5SFE celica
post Aug 31, 2010 - 2:57 PM
+Quote Post
dubb_head

Enthusiast
*
Joined Aug 8, '09
From Toronto, Canada
Currently Offline

Reputation: 0 (0%)




Hey,

My 94 celica just hit 125 k miles the other day... I think I am on the stock, factory clutch. The grab point of the clutch is just about half way up of the pedal travel.

I do not have any slipping. The rpm increase slowly, say in 5th gear when under WOT and also in lower gears when I accelerate even in the high rev range all the way to redline.

I do not abuse the car and shes my daily driver...I am curious how much longer I got.

Also the drivetrain, sometimes jerks back when I do not wach my shifting closely. I did all the tune up items and shes got a new distributor as well as new rear KYBs since they were a little soft. The shocks in rear decreased some of the jerks but its still not gone completely.

This points me to the clutch, is it getting tired ? Does the pressure plate have to do anything with this ?

Are the 6 gen celices a pain in the butt to do a clutch, how is the access ? I never did a clutch but my coworker offered to help if I need to do it and he has done clutches in the past.

Thanks all....

post Aug 31, 2010 - 3:25 PM
+Quote Post
JuMPiiN



Enthusiast
****
Joined Nov 10, '09
From Louisiana
Currently Offline

Reputation: 5 (100%)




Also the drivetrain, sometimes jerks back when I do not wach my shifting closely.

Rear tranny mount possibly going out ??

If your RPM increase slowly then maybe you have a vacume leak or something ?

I dont know why that would be your clutch if theres no slip or anything.
post Aug 31, 2010 - 4:49 PM
+Quote Post
Remy



Enthusiast
****
Joined Jan 25, '06
From MN
Currently Offline

Reputation: 19 (100%)




Read this it would help give you an idea about a clutch job.

http://www.6gc.net/forums/index.php?showto...3&hl=clutch

This post has been edited by Remy: Aug 31, 2010 - 4:50 PM


--------------------
"To Protect And To Serve The Wealthy" -POLICE
post Sep 4, 2010 - 12:28 PM
+Quote Post
dubb_head

Enthusiast
*
Joined Aug 8, '09
From Toronto, Canada
Currently Offline

Reputation: 0 (0%)




QUOTE (JuMPiiN @ Aug 31, 2010 - 4:25 PM) *
Also the drivetrain, sometimes jerks back when I do not wach my shifting closely.

Rear tranny mount possibly going out ??

If your RPM increase slowly then maybe you have a vacume leak or something ?

I dont know why that would be your clutch if theres no slip or anything.



I did the engine mounts F and R and it improved a bit...What rear tranny are we talking about here ? I see 2 mounts on each side of the frame rails and 2 mounts for the front of engine and one at back of engine ?

Hmmm I should look into tranny mounts I guess

post Sep 4, 2010 - 7:29 PM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




the front, rear, and drivers mount are the tranny mounts.


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 5:15 PM