Searching for Front Wheel Hub and bearings, Are there any Aftermarket product for this? |
Searching for Front Wheel Hub and bearings, Are there any Aftermarket product for this? |
Sep 19, 2010 - 11:58 AM |
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
i have been looking for a while, can someone point me in the right direction....i search the forums....want to avoid toyota dealer for them and all i can mostly find is just the bearing for the front...the rear i found both the hub and bearing set, but not the fronts.
please post place or link to the product if you know....will the newer celica 2000+ front hub and bearings work? if anyone one is looking for the rear front hub and bearing...the brand i bought was TIMKEN Product #512137 00000 This post has been edited by chacha: Sep 19, 2010 - 12:01 PM |
Sep 19, 2010 - 12:21 PM |
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
Fronts have to come from the dealer, see the sticky regarding the dealer LAGOS hooks us up with
|
Sep 19, 2010 - 1:02 PM |
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
thanks...i guess i can't really avoid the dealer for the fronts.
|
Sep 20, 2010 - 1:31 AM |
|
Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
There are aftermarket bearings for the fronts, but probably not the hubs.. which should be replacedwhen replacing bearings. Hubs from the dealer come with the bearings and seals.
-------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
Sep 20, 2010 - 1:41 AM |
|
Enthusiast Joined May 6, '08 From Lisarow, NSW, Australia Currently Offline Reputation: 0 (0%) |
There are aftermarket bearings for the fronts, but probably not the hubs.. which should be replacedwhen replacing bearings. Hubs from the dealer come with the bearings and seals. When I rang up a while back toyota wanted roughly $400 just for the hub, $150 for the flange and $120 for the bearing, they said it wasn't altogether. I suggest you just ring around lots of wreckers, 94-99 ST204 hubs will work and ABS will work on non-ABS its just a cable that you have to take off. |
Sep 20, 2010 - 9:54 AM |
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
IMO if you are getting a hub....get a BRAND NEW one from the dealer.
and no bearings don't come with the hubs. you can get bearings from autozone/advanced auto ect for $60 and change |
Lo-Fi Version | Time is now: January 11th, 2025 - 5:36 AM |