I got another 240sx. Options

[JuMPiiN]

I'm buying another 240 with a SR20DET and S15 front end conversion.
With that being said my car will be for sale for 2K. With old engine for parts an the new one with the wiring harness and ecu all there.

I like everyone on this forum I plan to stay on here and stay social and help out with any questions I can answer. And if my at doesn't sell, then I guess I'll just let it sit there until I'm finished with the 240 I'm getting.

Nothing is 100% yet I'll find out tmo afternoon if I'm for sure getting it. But I'm about 90% sure I'll be driving it home tmo.

And for Yarik, you are by far my favorite person I've met on this forum. Lol !

This post has been edited by JuMPiiN: Sep 22, 2010 - 8:08 PM

[HectortheRican]

Hey, a 240 with an SR and a strawberry front? That's not a bad trade at all, I'm actually a bit jealous Good luck!

[Keiri]

Pics of the 240 when you get it!

Enjoy the new ride and GLWS of the 6GC.

[richee3]

240's are fun cars, and as long as they've been maintained right, they'll last forever. The S15 is a great looking front end too. Definitely post some pics up.

[Ted95]

pics pics pics picsss!!! lol

[JuMPiiN]

Im going to be finding out in a few hours if it's goin to happen. But I'll poet pics when I get back. It's a project. I'm mainly buying it for all the parts that comes with it. Lol, the hood is carbon fiber, the trunk is carbon too with plexi glass back. Fenders rolled with full complete trine suspension set up. 275's in the back 245's in the front. I'll just scan the sheet of all the parts and everything when I get home.



I'm not sure if this should be in general or O/T, so you can move it if you need to.

[richee3]

O/T since it's not 6gc related, but it's cool. It's a good read nonetheless. Sounds like a good car.

[JuMPiiN]

Alright Manny you can move this to O/T that's my fault. And its a pretty solid car. Tones of greedy parts just needs some body work and it's perfect. I'm getting rid of that plexi glass trunk though.

[njccmd2002]

so al the rebuild, well gl. Im thinking about a new car too..

[JuMPiiN]

So I got it, picking it up tmo afternoon with a few parts. I got the greddy fmi Profec type s boost controller. Apeci power FC, blah blah blah alot of other stuff. I'll post pics up tmi for sure.


And yea I'm just going to run the celi through auction and see if I can get like 2-2500 for it. Hell even 1700 would work. So I can buy the greddy 760 injectors and a gt28 turbo so I can drop the sr20 in it. It still has the KA in it.

[HectortheRican]

Hey, at least the guy wasn't stupid and swapped in a CA18. Still no clue why people do that... It's RB>SR>KA>CA lol

[richee3]

It's officially tomorrow. I see no pictures. I demand MOAR PIKCHARS!!!!

[HectortheRican]

YES! PICKCHARS!

[JuMPiiN]

[HectortheRican]

WHY DID HE GET RID OF THE SIDE VENTS ON THE FB!? I WANT TO KILL HIM, HE MURDERED THE SEXIEST LOOKING BUMPER FOR THE S15!!!

And no, that wasn't a caps lock fail, that made me angry >:(

Are you looking into 180sx tails or do you like the USDM look?

[JuMPiiN]

Ill have better pics sometime next week when i get it inspected and cleaned and everything. It has 36 Way ajustable coilovers, witha bout 3K on them, pillow top mounts, ajustable camber plates, front and rear strut bars, 6point roll cage, inside is gutted, no rear seats, or rear panels, no spare tire, carbon fiber hatch, carbon fiber hood, ( need S15 hood hinges ), S15 complete front, front and rear wide body fenders. 30MM 300ZX TT brakes front and rear with steel brake lines.

And parts that come with it.
SR20DET ( roughly 30K from 240sxmotorsports.com, with receipt )
Wiring harness already sent off and wired correctly for the swap for plug and play
Greddy Type R BOV ( with stiffer and softer spring )
Greddy Oil Catch can
Greddy Profec Type S Boost controller
Apexi S.A.F.C II
APexi metal head gasket for the SR
Greddy over flow tank
Greddy Type S intercooler and piping
Greddy Downpipe
Greddy engine torque dampener
Greddy Intake manifold and Fuel Rail
Megan Racing turbo manifold
HKS Hi Power Exhaust
Stage 5 Spec twin plate clutch with 8lb flywheel
300ZX TT Radiator and 12' electric fans ( installed )
Z32 MAF
5 lug conversion ( Installed )
Everything to swap it from Auto to manual, including tranny, wiring.... everything.


And the only thing I need to buy in order to swap in the SR are:
Apexi Power FC ( ordering next week )
Greddy 760 Injectors
Gauges and Gauge pod

and the optional upgraded pulleys and of course the little things like oil pump, water pump, fluids. the usual. Im just going to run the KA until i have those things and im ready to put it in.

[njccmd2002]

what happened to that car!!!

[JuMPiiN]

WHY DID HE GET RID OF THE SIDE VENTS ON THE FB!? I WANT TO KILL HIM, HE MURDERED THE SEXIEST LOOKING BUMPER FOR THE S15!!!

And no, that wasn't a caps lock fail, that made me angry >:(

Are you looking into 180sx tails or do you like the USDM look?

Im getting the Kouki 180sx tails for sure. But looks arent on my agenda right now. Just finishing up getting the last bit of parts needed to put in the SR.

I bought it basically for the parts, the parts alone are worth double what i paid for the car, and there all new, and all have receipts. ALL OF THEM. And the front bumper was gone anyway. It had been broken and repaired so many times previously. Honestly you'd have to see it in person.

[HectortheRican]

WHY DID HE GET RID OF THE SIDE VENTS ON THE FB!? I WANT TO KILL HIM, HE MURDERED THE SEXIEST LOOKING BUMPER FOR THE S15!!!

And no, that wasn't a caps lock fail, that made me angry >:(

Are you looking into 180sx tails or do you like the USDM look?

Im getting the Kouki 180sx tails for sure. But looks arent on my agenda right now. Just finishing up getting the last bit of parts needed to put in the SR.

I bought it basically for the parts, the parts alone are worth double what i paid for the car, and there all new, and all have receipts. ALL OF THEM. And the front bumper was gone anyway. It had been broken and repaired so many times previously. Honestly you'd have to see it in person.

Well then in that case, AWESOME!! I hope you find the same bumper in healthier condition lol

[JuMPiiN]

I'm thinking in a few months I'm going to apply for a magazine or some sort or sponsorship bc of all the greddy parts. Idk it's worth a try.