C-One Bumper Options

[xHiKO]

Hi i am looking to get a C-One bumper and i am wondering if i will be needing to get a new hood or can i just keep the stock hood with the bumper. or if i need to do any other modification. so question being can i keep everything stock and just add on a C-One bumper?

[Akirad1]

same here and do you need the gt4 turn signals or bumper lenses what ever they are called

[xHiKO]

hmmm well ive done some research and i think i have found my answer... i went to the site and there are 2 styles of bumpers for the celica. There is one for just the regular 6th gen models and one made specifically for the GT-4 Model.

i guess i will just answer my own question so that other people will know as well. But anyways from what i see it looks as though the middle of the GT-4 bumper comes up higher than the regular st gt or gts models
and by middle i meen the area between the high beam lights.




so that would mean that if you do not have a GT-4 hood you should get the regular C-One bumper for the celica. If you do have or want to do a GT-4 conversion with the C-One bumper you should get the GT-4 C-One bumper.

So if you are getting a C-One bumper from either the site or a third party MAKE SURE that you get the correct one as the GT-4 bumper will require that you have a GT-4 hood.

Akirad1... from what i looks like in the pictures i posted, the turn signals appear to be different... i would also assume that housings for USDM and JDM models would be different so take that into consideration as well.

[Akirad1]

thanks

[slow_yota]

Hmm..Where can i get that hood ???

[circuscatch85]

To anyone who has the whole body kit, or a part of it: Is it good quality? or does it not fit right, cracks easy, etc?

[Sebotage]

can someone who already has one of these bumpers tell me what material this is made of? polyurethane or f/g?

[azian_advanced]

fiberglass.. even the real C-ONE bumpers are fiberglass.

[xHiKO]

Hmm..Where can i get that hood ???

That hood you can actually purchase off of the site www.c-one.co.jp HOWEVER i suggest you ask someone japanese to translate for you because it is a japanese site. OR!!! you can buy it off of someone that already has it that is selling it.

can someone who already has one of these bumpers tell me what material this is made of? polyurethane or f/g?

Yup fiberglass.

[elvasoshexai]

places like http://www.bulletproofautomotive.com/ will import it for u

[Sebotage]

word! then i could actually fiberglass over the giant hole between the headlights that makes it look like a 70s camaro

[CelicaST_CALI]

y would u do that...-_-

[reko]

I have it, you have to make it fit...

I mean... the top part fits like a charm... but you will have to make it fit to your fender (because its a litlle smaller) on the front and on the wheel side.

I used stock turn signals and made it stick there with urethane

You can find it at http://www.onderground-design.com and at www.andysautosport.com



This post has been edited by reko: Aug 18, 2008 - 9:30 AM

[BonzaiCelica]

is this a C-One bumper as well?? it reminds me of the Integra Type R doesn't it. But it flows on our car way better!!

[BonzaiCelica]

anybody know if its a C-one Bumper or not!???

[Promasta]

yes, a slightly modified one.

[BonzaiCelica]

well modified that way looks so good. Its my favorite bumper of all. Getting an authentic C-One Bumper for the ST202 would be very difficult wouldn't!!! almost impossible

[Promasta]

why would it be difficult?

rhdjapan.com

i got an authentic c-one lip for the st202, took 3-4 weeks to arrive from japan