closed Options

[Needles]

hi, i just begin to mod my celica , got my GT-4 HOOD today ! wooooooooooooo and the gt-4 rear wing , there is some scratch and i will need to fix it but that worth the price, i think, 300$ hood , (picture in my profile) 100$ rr wing , and i had to convice someone whit front end convertion to sold me those... i also buy the longer inch (lock hood) 20$. and im in waiting the , yeah this front bumper that i see rarely on web u can see it there http://www.andysautosport.com/toyota/1994_1999_celica/ the black car at the upper screen is this xtreme vis kit the same i order from tunning shop near (only front) for 520$, (im in south montreal) i will post picture of my car after that. i just want let ppl know that kit, that i think is really great, i cant find it nowhere , just 3 picture in the all web.... why so rare, anyway, i hope they gonna had it in the body kit section:)

This post has been edited by Needles: Jan 6, 2011 - 3:23 PM

[Needles]

sup everybody ! i like this site ans i use it for my project a lot, ok , i did the a/c all arounrd look blue today, was such a tought move, as i bought the 10 led blues for 15$ i put 9 in the box (i RIP OFF SOME LED THERE, and glue the new led whit wire on it) took me 1 day , and i put the last one in the center box for light , i have a switch, on/off i put under the steering, ........................................i try moving out my green led in the rpm and speedo, and put white buld, , but look great but look WELLOW LIGHT !! I RECEIVE my blue bulb, not led tommmorow, i try this and let u know if this ok. (put on my original blue rear wing on the gt4 pad today, need some drill for the hole in the wing , and got blue flasher in the dash, replace shifter leather today too, and i glue right in my rpm some white and red line around the needles to the number, looks GREAT , i put pick soon i have time or when i have my thunmder GT-4 FRONT BUMPER, KEEP DOING WRITE UP OF WHat u done !!!

[SeverX13]

[easternpiro1]

.........

welcome to the site man! read up! there is a lot of info here that u will enjoy!!

[Needles]

today i got this

right from japan, he buy it 350, in japan, 1 month ago, got it for 170$ , bi xenon kit whit angel eye and low and hight beam 6000k i cant wait to put them on, ho and they have smaller box whit faster high low change, pictyure of the car soon i receive my xtreme front bumper

[Needles]

here some pic i take after i put the front bumper and clear blue turn signal, whit projector bi xenon angel eye, and hid 6000k on low beam, i will bring better picture soon

[Needles]

[Needles]

for the clear blue turn i had to remove the orange ting inside the lens, to do that, just heat it up for 5 min whit a heat gun, (when u see the plastic become soft or bit juiicy cause the heat, wait 10 sec and continue heat it up, u need the glue heat up, not the plastic after that it come out slowly whit a screwdriver enjoy

i did the same thing to put the angel eye in but lot more work for the angel, had to cut the back a big circle , paint the inside in black and fix it whit silicone

[Needles]

please note that my car is very dirty in these picture and taken whit my camera laptop , bad resolution sorry, ho and yes, for the one who will ask it, i will do custom job whit the front bumper, i ordered it from vis, and they send me a dirrent unit, (i ordered the junzai front) but look awsome, the only thing is the gap ****** ** *** **** between the hood, but U CANT ALWAYS GET WHAT U WANT, like mick jagger say.... i suppose, but, it fit like a charm at 1 milimeter near, i post new pic soon a clean it

[96stgreendemon]

Silicone is a big big no no.
that vinigar smell from it is a drying agent, its terrible for plastics and will cause it to become brittle
if you are going to use silicone get the stuff that has no drying agent, its usually special order, although some hardware stores have it
or you can go to the nissan dealership and get the headlamp silicone

[Needles]

ok thank for the aDvice

This post has been edited by Needles: Dec 22, 2010 - 7:55 AM

[CelicaZR]

What front bar is that?

[Needles]

today i got 2 mr2 turbo recaro optinal seat

[Needles]

like always, they wont fit any of the bolt of the 6gc and they have less larger rail . to put it on the celica , (for the driver seat) i start whit the left bolt, just need to pry it and it can be bolt on easely, need spacer for the right side, that i dont have, and need a big specer for the rear right bolt, it really doesnt fit there, finnally, i had the left rear bolt fix whit some little tricky metal bracet

basically, it one side of the radio holder frame lol.... use to fit the seat and bolt on and need a little spacer under it, i will do a better job when i will have time, enjoy






This post has been edited by Needles: Dec 23, 2010 - 2:27 PM

[Needles]

ho for the silicone tip.... to put back the lens in the headlamp i dindt use anything, just heat up the old sealant and put it back together, i forgot to mention it

i had fix my two seat today, show pic tommorow

[96stgreendemon]

You will have moisture in the lamp in no time, i swear im not trying to make you look or feel like a retard but they need to be sealed, go to the nissan dealership and tell them you need the grey headlight sealant, yes i know its nissan but it is almost impossible to find from toyota, but you will get moisture in there if you do not seal it. Just trying to help you

[Needles]

i ended this tread, im on general discussion, needles progrees thread,