INFORMATIVE: ALL TORQUE SPECIFICATIONS, List of Torque Specs for 6gc 1.8L and 2.2L Options

[trdproven]

I went ahead because I needed some way to look at torque specs easily. I compiled the torque specs per BGB. Some may have redundant lines - thats due to the BGB showing it more than once.
For your ease. I can send you guys the PDF or post it somewhere but you can just download the jpegs and combine them into a PDF file relatively easy.












This post has been edited by trdproven: May 15, 2012 - 8:00 PM

[UVZ164]

Nice, very useful!

[KAOS]

Nice - but what about the other platforms?

ie. 2.0L 3SGE rev3; Beams, etc??

[richee3]

Nice post! Well done. I wish I had this when I swapped.

[Syaoran]

I VOTE STICKY!!! I WILL need this sooner than later.

[trdproven]

Nice - but what about the other platforms?

ie. 2.0L 3SGE rev3; Beams, etc??

I'm not sure if I can find something for that. 1.8 and 2.2 manuals are so much easier to find. For the all trac or 3sgte, I would assume in general most of these torque specs apply and the difference would be mainly engine, trans, some suspension. i'm sure you could also use a 4th gen or 5th gen 3sge/3sgte manual in some occasions. The beams is another thing, could be similar to a regular 3sge, not to mention the beams manual was only in Japanese and is considered a collectors item.

This post has been edited by trdproven: May 15, 2012 - 8:18 PM

[Rusty]

great stuff added

for people wanting the Gen 3: 3S-GE & GTE torque specs, they can be found in the repair manuals in the above sticky thread
(RM396E) 3S-GE Engine Repair Manual

(RM398E) 3S-GTE Repair Manual
(RM399E) ST205 Chassis and Body Repair Manual

Now the BEAMS repair manual, as pointed out was only available in Japanese and is hard/$$ to come across. I have heard of some people having it/ trying to translate it into english, also as far as I can tell it hasn't been posted up on the web. However it appears that most/all of the torque specs are the same as the Gen 3 3S-GE

[trdproven]

Personally some of these torque specs dont seem tight enough for me.

[BonzaiCelica]

its been confirmed on beams owners group that all 3rd, 4th, and 5th Gen 3SGE motors use the same torque specs.

[scott95]

Hi the head gasket has gone on my Celica st202 3sge and i was woundering what the torque settings are for the head bolts any help would be greatly accepted

[Rusty]

Check the above sticky for the (RM396E) 3S-GE Engine Repair Manual, has all the info & torque specs for the job

[Tigawoods]

bump for sticky or including this in a sticky thread

[Rusty]

It is twice under the 7A and 5S sections

[Tigawoods]

welp....double the "im an idiot for not looking hard enough" haha

[demmahom34]

hi for some reason the jpg or pdf youve listed for the torque specs are not showing and it says i need to upgrade to view it or something like that.