Side markers don't blink., They light up but do not blink. Options

[dudeofchaos]

I just switched from usdm fenders to jdm fenders. Now the side markers light up when I turn the low beams on but the side markers (Flashers) do not blink. They were when I had the usdm fenders/side markers. There are 2 wires coming out of my side markers, could there be 1 missing? Any suggestions?

This post has been edited by dudeofchaos: Jun 26, 2011 - 8:25 PM

[hatchy_gt-s]

Check the bulbs if they're not 194s (ie dual filament) thats why they're not blinking

Edit: Check to see if they flash when hazards are on, and if you can check voltage when the flasher is on.

This post has been edited by hatchy_gt-s: Jun 26, 2011 - 8:35 PM

[dudeofchaos]

Check the bulbs if they're not 194s (ie dual filament) thats why they're not blinking

Edit: Check to see if they flash when hazards are on, and if you can check voltage when the flasher is on.

Alright thanks! But are the 194 bulbs for jdm of both jdm and usdm side markers? Will take a further look at it tomorrow, thanks for the info.

This post has been edited by dudeofchaos: Jun 26, 2011 - 10:24 PM