![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) ![]() |
I want to get more power out of my 5sfe so far I have a short ram intake a header an I get a new exhaust this Saturday
what else can I do to build more power is 170 hp possible without turbo -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 ![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Aug 29, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) ![]() |
definatly not without alot of $$
cams will probly be ur next bet but i hear they run up in the high hundreds This post has been edited by PolliS_5S-FE: Aug 30, 2011 - 6:18 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) ![]() |
ok but is there any little things I can do that may help some?
I found a head package on ands autosports for 1900 but id like to see a reveal of it -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
5sfe is a torqueee motor but it lacks aftermarket support for parts.
What you can do that is realistic is: Turbo it, SMAAY has a bolt on kit for the most part. Or N/A Cams Wires Plugs Intake headers Downpipe Exhaust Flywheel Clutch ignition and tune it correctly. -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) ![]() |
ok I got a few questions about doing a n/a build will a dizzy from a older model 2.2 work in my 95
so I can run a bigger external coil will a mad 6al box work on a celica what's a good plug wire to run I have ngks but there only a 7mm wire will port an polish work do any good on these head where can I get a programmer at or do I just need to get a dino tune? -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 ![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) ![]() |
Cams aren't that pricey really. I got a set from Colt Cams for my Celica for $435 shipped back to me. Haven't gotten them yet but they're coming. Anyway, that and you can P&P the head, shave the block, tune it. Lots of money but if you got to rebuild it or something then you can do that stuff then. Otherwise, an engine swap or turbo it like others said.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) ![]() |
ok I might look into them andysautosports has a head package that comes with pnp head regrind cams a pnp intake an throttle body an tuned ecu
its made by hide performance it costs 1900 but I got a buddy that runs a hot rod shop that can pnp everything im thinking about a 3sgte but not sure what year range to look for or anything like that plus I wanna see what the stock motor will do with alittle work -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 5:49 PM |