 Best place for exhaust? |
  |
 Jul 19, 2011 - 8:57 PM
|
 
|
|
Enthusiast  Joined Jun 10, '10 From Fredericton, New Brunswick, Canada Currently Offline Reputation: 0 (0%)  |
Where is the best place to get an exhaust system for an st205 from the downpipe back, in 3" stainless? I'm trying to stay under 1000$ but if its a bit more than that, thats ok too. Been scanning euro-bay but everything i've found on there has been 2.5" thus far. Any suggestions? I was going to go with the aussie midpipe and blitz nurspec R combo from fensport, but they are currently out of stock of the mid pipe and dont expect any for another 8-10 weeks. Any suggestions are appreciated
|
|
Jul 19, 2011 - 9:29 PM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Jul 19, 2011 - 11:59 PM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
order the nurspec and have a local exhaust shop fabricate a 3" mid pipe.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Aug 10, 2011 - 12:49 AM
|
|
|
Enthusiast Joined Jun 7, '11 From so cal Currently Offline Reputation: 0 (0%) |
so you can vouch for negun website? i found some stuff i would like to order
|
|
Aug 10, 2011 - 1:03 AM
|
|
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
QUOTE (99gt3sge @ Aug 10, 2011 - 1:49 AM)  so you can vouch for negun website? i found some stuff i would like to order I personally have never ordered from there unless its a rare item. In my opinion shipping would be around $150 plus alone. Do yourelf a favor and buy a universal muffler (hks, greddy, apexi, skunk2) and then buy yourself a ultra quiet vibrant resonator. Find a local shop that does mandrel bends and works with stainless steel piping. It'll be much cheaper this way and all your products will be brand new. thats what I'm doing -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Aug 18, 2011 - 3:43 AM
|
|
 Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
I bought all of the stuff for mine online and took it to an exhaust place and said "build it" 2.5 Borla universal muffler, magnaflow 3 inch inlet/outlet highflow cat with 3 inch to 2.5 inch reducers on each side, and a 3 inch flex pipe by the cat. Magnaflow cat was $75 on ebay, flexpipe was $20 on ebay, reducers $10 a piece, borla was $200 I think? and the piping welded at the exhaust shop was $200, so a little over $550 for a full 2.5 inch system with borla muffler and magnaflow high flow cat (which I call my super high flow cat because of the 3 inch inlet/outlet...muahahahahahahahahaaaaa)..
This post has been edited by match220: Aug 18, 2011 - 3:44 AM -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
|
Aug 18, 2011 - 6:36 AM
|
|
|
Enthusiast Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) |
nothing beats home made lol!
-------------------- |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 18th, 2025 - 5:30 PM |