WTB: GT4 Frame Rail adapters and GT4 bumper Foam, MODS CLOSE PLS GOT PARTS Options

[spy00005]

As the title says im interested in a crash bar and bumper foam and also turn signals so i can install everything and change my front end if its local im willing to pick up if not give me price+shipping to 10705. thanks.

8/14/11 - got crash bar and turns still need adapters and foam

This post has been edited by spy00005: Aug 28, 2011 - 6:02 PM

[spy00005]

BUMP

[black93hardtop]

I have the crash bar.
upper bar/bumper support (a little bent, thin and east to fix)
Two left and right pieces I believe they are for the headlight support?
No foam though.

Offer?

Thanks,
Brian

[spy00005]

I have the crash bar.
upper bar/bumper support (a little bent, thin and east to fix)
Two left and right pieces I believe they are for the headlight support?
No foam though.

Offer?

Thanks,
Brian

do you mean it has the adapters as well(the two left and right pieces)? the bottom in red next to the one?


because thats what i want how much with shipping to 10705?
Also any pictures of them?

This post has been edited by spy00005: Aug 10, 2011 - 2:31 PM

[spy00005]

Bump, want to set up my front end soon.

[spy00005]

Purchased the Crash bar and turn signals STILL NEED frame Rail adapters and Foam. anybody?

[jjbenzo]

I may still have the crash bar end pieces (frame rail ends that mount the crash bar to the car). I know I still have brand new metal bumper "rails" that go on each side of the bumper in the wheel well area (according to pic they are part numbers #52115-20320 and #52116-20220). I also have the upper metal rail that goes at the top of the bumper in between it and the hood (#52521-20200) and it's corrosponding rubber molding (53395-20020). Also, anywhere you see Toyota calling for certain fasteners, screws, ect on the above diagram...I have. I actually have enough for the hood as well (all of it's vents). I would like to get rid of all of these fasteners together. I also have the hood release cable that goes with LHD GT-Four bumper and hood/hood release. In case you are wanting the clear JDM headlights, I have a both inner high beam clear lights that are brand new in box available. All of my parts are brand new in OE packaging except for the crash bar end pieces (if I still have, gotta go look). Let me know if you are interested in anything.

This post has been edited by jjbenzo: Aug 15, 2011 - 5:08 PM

[spy00005]

I may still have the crash bar end pieces (frame rail ends that mount the crash bar to the car). I know I still have brand new metal bumper "rails" that go on each side of the bumper in the wheel well area (according to pic they are part numbers #52115-20320 and #52116-20220). I also have the upper metal rail that goes at the top of the bumper in between it and the hood (#52521-20200) and it's corrosponding rubber molding (53395-20020). Also, anywhere you see Toyota calling for certain fasteners, screws, ect on the above diagram...I have. I actually have enough for the hood as well (all of it's vents). I would like to get rid of all of these fasteners together. I also have the hood release cable that goes with LHD GT-Four bumper and hood/hood release. In case you are wanting the clear JDM headlights, I have a both inner high beam clear lights that are brand new in box available. All of my parts are brand new in OE packaging except for the crash bar end pieces (if I still have, gotta go look). Let me know if you are interested in anything.

the main parts i want are frame rail adapters 57201-20060 and 57202-20070 and foam 52611-20150, ill take all the screws and fasteners but im sure i have most. i have the top support bar and rubber and all the grills and vents for both bumper and hood and the rails. wasn't really looking for high beams but for a good price i would purchase them. and i have the hood latch. i what to put everything together soon so really what i need are these 57201-20060 and 57202-20070 because i got everything else and crash bar should be on its way i paid for it a couple of days ago, Foam can get latter on got some ideas for temp solution. if anything get me a quote for the things i need and then a separate one for everything you have that you want to get rid of just incase. shipping to 10705. thank Ray.

This post has been edited by spy00005: Aug 15, 2011 - 11:18 PM

[jjbenzo]

Well, I went through and dug out more parts and found the frame rails. I could not remember if I had already sold them or not. These GT-Four frame rails were very difficult for me to obtain. I searched for over a year before finally finding a wrecked GT-Four that someone was willing to remove them from for me. I paid $100 back when I bought them. I'm not looking to get that much, just want to give you an idea of what they cost me. Shoot me an offer, as I have no need for them anymore.

[spy00005]

thanks thats exactly what i want pm'd.

[spy00005]

PLS close got everything ecept foam and dont really need it gonna do something about it.