what clutch kit and flywheel i must put on my st205, exedy or act |
what clutch kit and flywheel i must put on my st205, exedy or act |
Oct 20, 2011 - 3:15 AM |
|
Enthusiast Joined Sep 2, '11 From cyprus Currently Offline Reputation: 0 (0%) |
hello i have st205 6GC and i need to replace clutch and i need option of clutch and Light flywheels to instal it up..
|
Oct 20, 2011 - 4:41 AM |
|
Enthusiast Joined Jul 14, '08 From Mauritius Currently Offline Reputation: 0 (0%) |
In my opinion;
Exedy is very good BUT...sometimes you r 'forced' to buy a new flywheel each time ur clutch disc is worn as they (disc and flywheel) r sold together as a complete set. Thus, even your flywheel is still fine, u may have to pay for a new one when buying another complete set. Unless you are buying only the 3 puck ceramtallic clutch or single kevlar disc then u won't get it with the flywheel. +Expensive! If u buy Exedy make sure you get the bearing and fork which sometimes they forget to give u. I personally like the Exedy Hyper Single (but its sold with the flywheel). ACT is good but heard some bad things in some cases. E.g: too hard on the pedal, disc damaged in some cases etc.. But for the price u buy it + u don't always need to buy a new flywheel then its worthy. Heard that it holds power very well too. Personally I am currently using RDP Racing 5 puck. I was amazed by its durability + it holds power very well. But its not very popular. I bought it Thailand. The clutch that i would like to buy next is the ORC Ogura...Heard its among the best but, its very expensive! I would avoid using F1 racing...as some people I know who used it said it was a lady driven clutch set. Very soft pedal...even a bit too soft. They changed it soon after for another brand. |
Oct 20, 2011 - 4:46 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
there are tons of options... I have been using clutch-masters nad have no issues.
-------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Oct 20, 2011 - 8:04 AM |
|
Enthusiast Joined Nov 15, '10 From Austria Currently Offline Reputation: 1 (100%) |
Hi,
what Malpaso said, i bought a ATS clutch a few weeks ago for my engine build, but unfortunetly i doesn't drive the clutch yet a the engine is a lont time build up a friend told me his carbonetic is very well to drive, and crbonetic buy the clutch from ATS but only the spec1 type, spec2 i just at ATS available here you can find some pics http://www.6gc.net/forums/index.php?showto...t=0&start=0 greetz This post has been edited by Sunny: Oct 20, 2011 - 8:06 AM -------------------- |
Oct 20, 2011 - 9:11 AM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
southbend clutch FTW! www.dxdracingclutches.com the MR2 uses the same clutch
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Oct 20, 2011 - 10:42 AM |
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Southbend Clutch + Fidanza flywheel. Love it.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
Oct 20, 2011 - 11:54 AM |
|
Enthusiast Joined Sep 2, '11 From cyprus Currently Offline Reputation: 0 (0%) |
Just know the told for the Brand HELIX if you know it.And told me its better to put with 6teeths
|
Lo-Fi Version | Time is now: November 23rd, 2024 - 7:18 AM |