6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> turbo 5sfe, is it possible?
post Oct 17, 2011 - 6:38 PM
+Quote Post
TannerEsser



Enthusiast
*
Joined Oct 17, '11
From Kent, WA
Currently Offline

Reputation: 0 (0%)




i was wondering if any one here has turboed a 5sfe and how did they do it. im just kinda tired of going slow and i was going to buy my friends 3sgte out of his mr2 but i dont really feel like messing with that right now. any ideas?
post Oct 17, 2011 - 7:02 PM
+Quote Post
zfjohnson07

Enthusiast
****
Joined Apr 11, '09
Currently Offline

Reputation: 11 (100%)




well
1. therse a search button that works like a charm
2. yes, hundreds of people have turboed their 5sfe
3. get the 3sge. that would be the best bet, ask everyone they will agree
post Oct 17, 2011 - 7:07 PM
+Quote Post
TannerEsser



Enthusiast
*
Joined Oct 17, '11
From Kent, WA
Currently Offline

Reputation: 0 (0%)




QUOTE (zfjohnson07 @ Oct 17, 2011 - 7:02 PM) *
well
1. therse a search button that works like a charm
2. yes, hundreds of people have turboed their 5sfe
3. get the 3sge. that would be the best bet, ask everyone they will agree

lol i dont want a swap! i could just get a 3sgte swap but i just want to try to do it to my 5sfe
post Oct 17, 2011 - 7:11 PM
+Quote Post
zfjohnson07

Enthusiast
****
Joined Apr 11, '09
Currently Offline

Reputation: 11 (100%)




get the 3sgte, youll get more power!!! and make it like the "gt-4"
post Oct 17, 2011 - 7:24 PM
+Quote Post
TannerEsser



Enthusiast
*
Joined Oct 17, '11
From Kent, WA
Currently Offline

Reputation: 0 (0%)




haha "like" if i wanted a gt4 id get the bumpers and crap i just want a faster car. but i want to turbo my engine i have an opportunity to get a 3sgte but i dont want to do that

post Oct 17, 2011 - 7:53 PM
+Quote Post
bsamps4

Enthusiast
****
Joined May 16, '10
From Raleigh
Currently Offline

Reputation: 12 (100%)




Its clear that youve done no research whatsoever, which is a shame. A 3sgte swap would be easier than putting a turbo on your 5s. You dont just "slap" turbos on a car and hope for the best.


--------------------
post Oct 18, 2011 - 9:22 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




you dont have to do a swap. look for Pressure2's and my threads on turboing the 5S-FE. i have a ton of pictures. I have all the raw materials to build another kit, i just dont have the time right now. Unless someone drops some $$$.


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Oct 18, 2011 - 10:23 AM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




You're a super newbie...but to be ncie, read the stickies and use the search function please.

to be really nice:

http://www.6gc.net/forums/index.php?showtopic=77843
http://www.6gc.net/forums/index.php?showtopic=5574
post Oct 19, 2011 - 7:51 PM
+Quote Post
TannerEsser



Enthusiast
*
Joined Oct 17, '11
From Kent, WA
Currently Offline

Reputation: 0 (0%)




QUOTE (bsamps4 @ Oct 17, 2011 - 8:53 PM) *
Its clear that youve done no research whatsoever, which is a shame. A 3sgte swap would be easier than putting a turbo on your 5s. You dont just "slap" turbos on a car and hope for the best.

ya cause i just wanted to "slap" one in my car haha its not a ****in sticker i know that lol and i did do my research and it would be way better for me if i turboed my set up and i know it can be done i just need to know how to do it
post Oct 19, 2011 - 9:02 PM
+Quote Post
match220



Enthusiast
***
Joined May 13, '06
From Kaimuki, HI
Currently Offline

Reputation: 10 (100%)




QUOTE (TannerEsser @ Oct 19, 2011 - 2:51 PM) *
QUOTE (bsamps4 @ Oct 17, 2011 - 8:53 PM) *
Its clear that youve done no research whatsoever, which is a shame. A 3sgte swap would be easier than putting a turbo on your 5s. You dont just "slap" turbos on a car and hope for the best.

ya cause i just wanted to "slap" one in my car haha its not a ****in sticker i know that lol and i did do my research and it would be way better for me if i turboed my set up and i know it can be done i just need to know how to do it


turboing a stock non-turbo car can be done, but I don't recommend it (even though there a lots of members on here that have done it to theirs). If you take everything into consideration in turboing your 5sfe...like the piggyback unit or EMS, someone to tune it, bigger injectors, oil feed for the turbo and the risks of oil starvation burning up the bearings, running new water piping to the turbo, and whatever else..then you would probably be better off just getting your friends 3sgte and dropping it in the celica. motor mounts line up, transmission bolts in, you just need the celica clutch disk sandwiched between the mr2 pressure plate and flywheel. You need your front engine mount bracket inside of the timing belt, and an electric power steering pump, unless you use your celica one and get an alternator bracket from an alltrac 3sgte (mr2 alternator mounts where the celica p/s pump is), and I believe you need a crank pulley too for the alternator/power steering pump changeover, then it's just mounting a FMIC and running the piping. I believe it to be easier than the 5sfe turbo and it would be quicker. The only downside is how you'll need to use some parts from your 5sfe so you would have trouble selling the engine if that's what you want to do, unless you're keeping or junking it. I used a lot of parts from my 5sfe during the swap, but my parts went onto a Gen III 3sgte, not the Gen II that it sounds like you are getting. I can't imagine them being different, but you never know. Hopefully this helps

This post has been edited by match220: Oct 19, 2011 - 9:16 PM


--------------------
-Jay

95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other
01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished
02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
post Oct 19, 2011 - 9:33 PM
+Quote Post
al94st

Enthusiast
**
Joined Dec 30, '09
From Wilmington, NC
Currently Offline

Reputation: 1 (100%)




QUOTE (bsamps4 @ Oct 17, 2011 - 8:53 PM) *
Its clear that youve done no research whatsoever, which is a shame. A 3sgte swap would be easier than putting a turbo on your 5s. You dont just "slap" turbos on a car and hope for the best.


Ben you should know better, Mr. instaflame laugh.gif . The real questions are: do you have the disposable income and can you do the work yourself (if not do you have even more disposable income)?. If the answer is yes, then yea no problem, it can be done relatively easily, just check out the info on this site. But, if you can get a 3s from a buddy, F****** get that shiz.
post Oct 20, 2011 - 10:16 AM
+Quote Post
TannerEsser



Enthusiast
*
Joined Oct 17, '11
From Kent, WA
Currently Offline

Reputation: 0 (0%)




QUOTE (al94st @ Oct 19, 2011 - 10:33 PM) *
QUOTE (bsamps4 @ Oct 17, 2011 - 8:53 PM) *
Its clear that youve done no research whatsoever, which is a shame. A 3sgte swap would be easier than putting a turbo on your 5s. You dont just "slap" turbos on a car and hope for the best.


Ben you should know better, Mr. instaflame laugh.gif . The real questions are: do you have the disposable income and can you do the work yourself (if not do you have even more disposable income)?. If the answer is yes, then yea no problem, it can be done relatively easily, just check out the info on this site. But, if you can get a 3s from a buddy, F****** get that shiz.

haha its gonna have like 210k on it by the time i get it lol
post Oct 20, 2011 - 5:07 PM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




join MR2OC.com and look there for additional support on turboing the 5sfe.. as for all the people who say to just swap in the 3sgte.. they do have a valuble point. since using the 3sgte turbo components (mani, turbo, DP) are one of the easyest ways of doing a 5afte... BUT.. POWER is power.. $$ is $$, and time and effort is just that.. set your self a goal.. a REALISTIC goal.. in terms of money spent, time and effort invested, and projected power goals.....

make a plan.. and STICK to it!!!!!!...

who cares WHAT is under the hood of our lil FF celi.. it does not matter what is in the bay as long as it meets your goals..

325Whp. 7afte, 7agte, 2grfe, 5sfte, 3sgte, 5sgte, etc, etc, etc,etc.. the list goes on.. its all good as long YOU get what you want out of it..

just my $0.02

good luck. biggrin.gif


--------------------
post Oct 23, 2011 - 10:22 PM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




5sfte turbo is still worth it and with the pride; you'll get decent power but reach a limit to surpass a 3sgte
3sgte turbo has so much more potential

but i think the real difference is money vs goals


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 12:52 PM