st215 comp and alt fit st205 3s engine? |
st215 comp and alt fit st205 3s engine? |
Dec 20, 2011 - 6:13 PM |
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
I'm talking to a guy that has a st215 alternator and a/c compressor up for sale and I'm wondering if they will fit the gen III 3sgte. I've been thinking about changing out the a/c compressor. Currently I have the stock 5sfe A/C setup with the lines. Are the compressor fittings different hard to find for the st215 compressor? I'm pretty sure the st204 ones won't fit the st215 compressor. Now would be a good time to do it since my condenser leaks and I have no refrigerant in the lines.
I'm also thinking about changing the alternator since it's my old 5sfe one. Is the electrical connector the same as the 5sfe one? -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
Dec 20, 2011 - 11:25 PM |
|
Enthusiast Joined Feb 1, '05 From Charlotte NC Currently Offline Reputation: 14 (100%) |
I'm talking to a guy that has a st215 alternator and a/c compressor up for sale and I'm wondering if they will fit the gen III 3sgte. I've been thinking about changing out the a/c compressor. Currently I have the stock 5sfe A/C setup with the lines. Are the compressor fittings different hard to find for the st215 compressor? I'm pretty sure the st204 ones won't fit the st215 compressor. Now would be a good time to do it since my condenser leaks and I have no refrigerant in the lines. I'm also thinking about changing the alternator since it's my old 5sfe one. Is the electrical connector the same as the 5sfe one? you can use the 5s alternator, but im not sure about the AC... iirc the lines wont match up.... whos selling this to you? -------------------- |
Dec 21, 2011 - 12:06 AM |
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
it's a guy over on celicatech. He says I can take off the manifold (plate where the high/low lines go in) and swap it with my 5sfe one. He has an st165, he seems knowledgeable but I don't know how much he knows about the st204 5sfe. I'm going to get them anyway because it's a good price.
-------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
Dec 31, 2011 - 3:38 PM |
|
Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
I have an ac compressor off my gen 3 for sale. Took it off just because I was too lazy to run the lines lol
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
Lo-Fi Version | Time is now: November 29th, 2024 - 3:11 AM |