Project 6th Gen, Just got it this past weekend Options

[celi_wabbit]

So, here it is the start of this project. Story is that I bought it for $500 with blown motor (that's what the owner thought), towed it home and founf out a couple things. The motor is not blown, the timing is only off! it is so off that it's causing some ticking noise and flooding the engine with gas when you start the car. It also badly needs of brake lines, somehow the lines from under the floor board got rusted and he cut the rusted part (about 9 inches long) and patched or jerry rigged it. Also has a small dent on the passenger side back fender and created a small surface rust, this is an easy fix.


Things I bought already for upgrade so far....

GT4 front bumper (comes with Headlight bracket, fog light, and reinforcement bar that the fog light also bolts up to).
Lowering Springs
KYB Struts
Interior stuff


Oh! by the way...looking for a GT4 hood. Preferably a white one.


Here some before pics....










This post has been edited by celi_wabbit: Jun 16, 2011 - 8:23 PM

[celi_wabbit]

Update... a little experiment with carbon fiber dash.

[RabidTRD]

Nice to see a fellow white 6GCer! Keep updating!

[celi_wabbit]

Nice to see a fellow white 6GCer! Keep updating!

Thanks! here is another....

I insulated under the hood also bc I'm planing on doing a carbon fiber wrap on the hood. (coming soon)

[Arsaces]

What wrap is that on your e-brake, it looks very well done!

[celi_wabbit]

What wrap is that on your e-brake, it looks very well done!

My e-brake handle is the real leather boot, if that's what your asking?

[cheela]

wow! great deal for $500. looks like u know what youre doing so keep it up.

[celi_wabbit]

wow! great deal for $500. looks like u know what youre doing so keep it up.

Thanks! I'll keep them coming...

[celi_wabbit]

Here my rims for now... and I also did the projector headlight. I had to solder a capacitors on my wiring for my HID conversion, wish I took a pix on that, but forgot!








This post has been edited by celi_wabbit: Nov 1, 2011 - 8:35 AM

[KAOS]

Looking great! Did you get the engine running properly?

[celi_wabbit]

Looking great! Did you get the engine running properly?

Yeah! all it was is the timing belt was way off, like a quarter of a turn on the pulley. The guy had taken it to the garage to change the oil pump and somehow they mange to fudge up the timing gear on the crank side. Instead of the pin dot facing towards you, they faced it towards the engine and that totally missed up the key that slides into the crank gap. This is why he thought the engine was blown, bc it was knocking so hard and smell of gas when he starts the car. I just had to find another pin and gear and set the timing properly. Now it runs like a champ, but still needs a little bit of tweaking on timing.

[kurt95gt]

what are you going to use to wrap the hood

[celi_wabbit]

what are you going to use to wrap the hood

a white vinyl carbon fiber wrap. I already bought it and it's on it's way. he! he! I can't wait to get started on it.

[kurt95gt]

Where do you order it from an does it look like real carbon fiber

[celi_wabbit]

Where do you order it from an does it look like real carbon fiber

If you look at the pix I took on the dash with blue carbon vinyl, that's what it looks like. I'm not sure if I can tell you it looks a lot like carbon fiber, it just mock the look. I guess from up close you can tell the deference, but if you step back, you may get fooled? The vinyl wrap does not have that glossy look the real carbon fiber has.

[Arsaces]

What wrap is that on your e-brake, it looks very well done!

My e-brake handle is the real leather boot, if that's what your asking?

Yes, where did you get it from, who makes it?

[celi_wabbit]

What wrap is that on your e-brake, it looks very well done!

My e-brake handle is the real leather boot, if that's what your asking?

Yes, where did you get it from, who makes it?

It's been a few months, so, I have to look around and check some of my emails for receipt. I'll get back to you when I find it.

[celi_wabbit]

What wrap is that on your e-brake, it looks very well done!

My e-brake handle is the real leather boot, if that's what your asking?

Yes, where did you get it from, who makes it?

It's been a few months, so, I have to look around and check some of my emails for receipt. I'll get back to you when I find it.

I think you can find them at TOP GAITERS BOOT. The store is from England and I think they sell on ebay also, let me check if I can find them.


Here it is....

http://www.ebay.com/itm/TOYOTA-CELICA-E-BR...d#ht_843wt_1270



http://stores.ebay.com/TOP-GAITERS-BOOTS/T...581&_pgn=10



http://www.ebay.com/itm/TOYOTA-CELICA-BEIG...5#ht_873wt_1270

[celi_wabbit]

Here is the GT4 hood and the front end conversion. Fog lights are not hook up yet. I'm trying to get some wiring kit for it since the 94 GT does not come with fog lights.

When I bought the front bumper, it came with headlight mounting braket and the GT 4 bumper reinforcement bar. All I had to do is find the front rail adapter which took me a while.






This post has been edited by celi_wabbit: Nov 1, 2011 - 8:34 AM

[cheela]

wow. you are quick!