 Gt4 hood and bumper gap |
  |
 Apr 30, 2012 - 9:38 AM
|
 
|
|
Enthusiast  Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%)  |
Hello,
So I bought a gt4 bumper and hood and had them installed, I thought if you bought both this would eliminate the gap problem, however there is still a one inch gap I don't like. I read the sticky over the conversion but couldn't find an answer So can anyone tell me exactly what I would need to do to close this gap? |
|
Apr 30, 2012 - 10:17 AM
|
|
 Enthusiast Joined May 15, '09 From yonkers, NY Currently Offline Reputation: 8 (100%) |
did you use the stock upper support bar?
The gt-four upper bar is higher in the center than regular ST/GT's. If you decide to get the gt-four support bar it needs to replace the existing one. It bolts in the center and welds on the ends.Otherwise, you can use custom spacer brackets or long bolts and have the bumper retainer clamped between the head of the bolt and a nut. This post has been edited by spy00005: Apr 30, 2012 - 10:22 AM -------------------- *Thing i want for my car(i wish i had money)*
-light blue tint (next step will do this right after i get my paint job) WTB Reasonably priced Projectors just Lows |
|
Apr 30, 2012 - 10:25 AM
|
|
|
Enthusiast Joined Apr 21, '10 From Boston Currently Offline Reputation: 0 (0%) |
Idk if ur profile pic is the hood you're talking about or not but that's not a gtfour hood.
If you did get the gtfour hood then check what spy00005 said. |
|
Apr 30, 2012 - 11:27 AM
|
|
|
Enthusiast Joined May 15, '09 From yonkers, NY Currently Offline Reputation: 8 (100%) |
actually after looking at his profile pic it looks like he had a gt4 bumper with a stock hood. if that is the case then the bumper might have been molded to fit stock hood because bumper would be higher than stock hood, don't know of their is anything you can do if that is the case. maybe mold it back in place.
-------------------- *Thing i want for my car(i wish i had money)*
-light blue tint (next step will do this right after i get my paint job) WTB Reasonably priced Projectors just Lows |
|
Apr 30, 2012 - 12:07 PM
|
|
 Enthusiast Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) |
I had a gap when I did my conversion. I welded an extra inch to my hood latch and put spacers and longer bolts on my upper support bar to get rid of my gap.
-------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
|
Apr 30, 2012 - 2:51 PM
|
|
|
Enthusiast Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) |
Sorry forgot to mention I had my gt4 bumper placed first, by a local body shop that is no longer in business
I put my gt4 hood on about 2 weeks ago myself, and have not uploaded pics cause I don't like the gap Which one do u think would be easiest or the work best? Im sure they used the existing support bar Thanks for the help guys |
|
Apr 30, 2012 - 3:25 PM
|
|
|
Enthusiast Joined May 15, '09 From yonkers, NY Currently Offline Reputation: 8 (100%) |
basically have 2 choices you can make custom spacer brackets or long bolts and have the bumper retainer clamped between the head of the bolt and a nut.
scroll down to part 6 unless you wanna spend the extra cash and get the actual upper support bar. either way if its on the stock support bar the bolts are pushing the center of the bumper further down in the and that's why you have the gap This post has been edited by spy00005: Apr 30, 2012 - 3:26 PM -------------------- *Thing i want for my car(i wish i had money)*
-light blue tint (next step will do this right after i get my paint job) WTB Reasonably priced Projectors just Lows |
|
May 1, 2012 - 1:48 AM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
get a longer bolt and put a nut in between to hold it up or just get a long bolt and use a tihick rubber spacer.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
May 1, 2012 - 8:16 AM
|
|
|
Enthusiast Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) |
I will try the longer bolt and if that doesn't work probably the spacer brackets
Hopefully they didn't mold the bumper or mod it too much upon installation once again, I appreciate the help |
|
May 2, 2012 - 5:23 PM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
here check out this thread
http://www.6gc.net/forums/index.php?showto...t=0&start=0 in the middle. I have a straight bar thats about an inch thick high its sorta hard to see it. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
May 3, 2012 - 10:42 PM
|
|
|
Enthusiast Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) |
That looks like a good idea as well.
I'm waiting until I can take the hood latch to get welded an inch higher (like the thread said) before i try to close it But when i was trying it and put the longer bolts with the spacer it felt like the top of the bumper was flexing a little to much right at the middle part where I was trying to raise it.... has anyone else gotten this? |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 5:25 AM |