clutch issue???!!?!? - 6G Celicas Forums

Welcome Guest ( Log In | Register )

clutch issue???!!?!?

Aug 11, 2012 - 3:51 AM
CAcelica29 View Member Profile Enthusiast Joined Aug 26, '11 From ventura, ca Currently Offline Reputation: 10 (100%)	today while driving my car started to do some weird things. when going into 1st gear from a stop it would grab and then rev an extra 1k when i was off the clutch and had the same pressure as before in the gas. it did this thru 3rd gear. not sure why just started. going to investigate tomorrow.

Aug 11, 2012 - 12:20 PM
Special_Edy View Member Profile Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%)	QUOTE (CAcelica29 @ Aug 11, 2012 - 4:51 AM) today while driving my car started to do some weird things. when going into 1st gear from a stop it would grab and then rev an extra 1k when i was off the clutch and had the same pressure as before in the gas. it did this thru 3rd gear. not sure why just started. going to investigate tomorrow. From what your saying it sounds like the clutch is slipping. Though the clutch usually slips in the highest gears first, and rarely in a lower gear

Aug 11, 2012 - 9:27 PM
Smaay View Member Profile Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%)	^^^ stranger things have happened -------------------- 2001 Celica GT-S Turbo 1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac

Aug 12, 2012 - 3:40 AM
trdproven View Member Profile Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%)	get a new clutch kit. -------------------- 94 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tom's\|Competition Clutch\|5Zigen\|Apexi\| \|Laille/Beatrush\|Magnecor\|Denso\|Royal Purple\|Optima\|PIAA\|PW JDM\|Megan Racing\|Nitto\| \|Work\|Greddy\|Samco\|Project Mu\|H&R\|Gates\|Moog\|Rota\|Yokohama\|Epman\|1320\|Upgr8 04 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tein\|BC Racing\|Greddy\| ~~89 Supra (Sold)~~ ~~90 Supra (Sold)~~

Aug 12, 2012 - 12:50 PM
CAcelica29 View Member Profile Enthusiast Joined Aug 26, '11 From ventura, ca Currently Offline Reputation: 10 (100%)	ys thats what i was thinking, it a $$$ issue right now. what would your recommendations be for a kit? im looking for something a lil stronger and more durable then oem. are clutch kits for the zz motors compatible since they use a C series trans like my 7afe.

Aug 12, 2012 - 6:41 PM
trdproven View Member Profile Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%)	the 7a doesnt do much, i would just get a stock kit or replacement aftermarket kit to keep costs down, idk how the replacement aftermarket ones last since there are many brands out there. You could try getting something simple like Exedy. Other high end brands are like ACT, Southbend, Competition Clutch, etc. but would run you some money. -------------------- 94 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tom's\|Competition Clutch\|5Zigen\|Apexi\| \|Laille/Beatrush\|Magnecor\|Denso\|Royal Purple\|Optima\|PIAA\|PW JDM\|Megan Racing\|Nitto\| \|Work\|Greddy\|Samco\|Project Mu\|H&R\|Gates\|Moog\|Rota\|Yokohama\|Epman\|1320\|Upgr8 04 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tein\|BC Racing\|Greddy\| ~~89 Supra (Sold)~~ ~~90 Supra (Sold)~~

Aug 12, 2012 - 6:57 PM
Smaay View Member Profile Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%)	yes the 1ZZ and 2ZZ use the exact same clutch as the 7A. if you got an OEM clutch for the 2ZZ then it should have a higher clamping force than a 7A clutch -------------------- 2001 Celica GT-S Turbo 1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac

Aug 12, 2012 - 11:51 PM
trdproven View Member Profile Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%)	^ is it the same diameter so that it can cover the surface of the flywheel exactly, or will it make its new mark? -------------------- 94 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tom's\|Competition Clutch\|5Zigen\|Apexi\| \|Laille/Beatrush\|Magnecor\|Denso\|Royal Purple\|Optima\|PIAA\|PW JDM\|Megan Racing\|Nitto\| \|Work\|Greddy\|Samco\|Project Mu\|H&R\|Gates\|Moog\|Rota\|Yokohama\|Epman\|1320\|Upgr8 04 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tein\|BC Racing\|Greddy\| ~~89 Supra (Sold)~~ ~~90 Supra (Sold)~~

Aug 13, 2012 - 12:02 AM
CAcelica29 View Member Profile Enthusiast Joined Aug 26, '11 From ventura, ca Currently Offline Reputation: 10 (100%)	QUOTE (Smaay @ Aug 12, 2012 - 7:57 PM) yes the 1ZZ and 2ZZ use the exact same clutch as the 7A. if you got an OEM clutch for the 2ZZ then it should have a higher clamping force than a 7A clutch i was curious as to this because some companies list clutches for the zz motors but not the 7a. thanks guys.

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Time is now: January 9th, 2025 - 2:24 AM