Turbo Timer Installation, Apexi Turbo Timer Options

[Guest_Jason_*]

Need some quick help on the Ignition Harness for the Turbo Timer.

The Turbo Timer comes with 3 wires (Grey, Black and White) and an Ignition Harness. Grey wire connects to the EBrake Sensor Wire, Black is the Ground and White is the O2 Sensor wire. Now, they say disconnect the Harness from the Ignition and do something to the Harness connected to the Turbo Timer. I have no idea what they are asking me to do, they completely skip how your suppose to go about the Ignition Harness's.

[Guest_Jason_*]

Nevermind, have to cut the wires from the Harness.

TT Harness Red Wire to Ignition Black Wire w/Green Stripe.
TT Harness Blue Wire to Ignition Blue Wire.
TT Harness Green Wire to Ignition Black Wire w/White Stripe.
Grey Wire to EBrake Sensor Wire.
White Wire to O2 Sensor / AF Ratio Gauge Wire.
Black Wire to Ground.

I'll get it hooked up (hopefully), and get some pics up.

This post has been edited by Jason: Jan 15, 2004 - 4:09 PM

[Supersprynt]

If you need any help i have the exact same one, just gimme a ring.
I mounted mine on the left side by the dimmer.