XXR 16x8 et20mm Options

[celica95-95]

Looking for some help i have coilovers looking at the xxr 521 16x8 et20

would they fit are celica ??

[RabidTRD]

I'm going to be running a XXR 002 16x8 ET0

Yeah, they'll fit hahaha. Make sure you get a 5x100 lug pattern.

Also, the rear will be in a bit most likely, front will fit right to the fenders. My 0's stick out past the fenders.

[celica95-95]

yea i was thinking the front would be just flush or stick out a bit

nice wel is that or the 527 17x8.25 et35 rear 25

[RabidTRD]

I never recommend a staggered setup as it makes it impossible to rotate your wheels. However, it does look nice... so more power to you if you want to do that. 25 in the rear would sit pretty close to flush and 35 in the front at 8.25 would also sit pretty decent. Personally, I like the 527's better for a Celica. The 521's look like stock GTi BBS's and aren't that cool IMO.

Wrap the 527's in a 215/40/17 or a 205/45/17 and they'll stretch nice too

http://tyrestretch.com/ is your BFF when it comes to tire fitment.

This post has been edited by RabidTRD: Apr 22, 2013 - 5:38 PM

[celica95-95]

You think i would need to fender roll at all with the 527 ?

good point on the rotate maybe do 35mm all around

[RabidTRD]

You'll have to do fender roll in the rear if you planning on slamming it. Otherwise, you may be okay.

35 and you could run spacers if you wanted to make it work a bit better. 35 in an 8.25 should sit pretty.

[celica95-95]

right now the coilover should give me a bit more room
dont think i will be slamming it