 Newest project: Exterior 3.0 |
  |
 Mar 7, 2004 - 1:10 PM
|
 
|
 Enthusiast  Joined Jan 17, '03 From Fresno, CA Currently Offline Reputation: 0 (0%)  |
hey my link if anyone wants to see it...i got it from streetconcept.com for
$179.99... i had it compare with cyberbestbuy.com..because cyberbestbuy cost the same but the shipping cost too much..streetconcept suppose to cost 220.00 but they compare it to lower down the priceMy car page |
|
Mar 7, 2004 - 4:38 PM
|
|
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
Heres what I got done today!
Started final fitment of the front before glassing.. have some sanding to do and a few other things but got about 80% of the way done with triming and etc on the front.. next week or maybe tomorrow I will start the actual glassin on the front. also did some on the sideskirt.. didn't get too much done cus I was more concerned with gettin the front driverside to fit correctly.. had some major fitment issues on that corner of the car but think I got most of it worked out. Put on my GT4 exhaust... well kinda  gonna have to put my fuel cell back on to make it fit correctly I kinda rigged it up but comes out the opposite side... If it didnt have soo much of a slant I would like it better but did look neat when I held up the supra rear bumper.. so who knows I might sell it if neone is interested, tell me what you guys think of it cuz im not sure if I like or not.Theres a pic of one of my new seats in the car also.. not mounted yet but in there.. I think it looks really nice  Let me know like always whatcha think          Oh yea some bad news for me... my intercooler is too small now it looks horrible in the opening so I gotta shell out some more cash..
This post has been edited by NEVERSTOP: Mar 7, 2004 - 4:41 PM --------------------  99 project version 3.0.. hello SEMA 2010 =) |
|
Mar 7, 2004 - 4:40 PM
|
|
 Enthusiast Joined Nov 12, '03 From Crestview, Florida Currently Offline Reputation: 2 (100%) |
all i got to say is WOW... thats seats looking great too.
-------------------- |
|
Mar 7, 2004 - 4:57 PM
|
|
 Enthusiast Joined Feb 9, '03 From Sioux falls, South Dakota Currently Offline Reputation: 1 (100%) |
i like the look of the exhaust, take a pic of it with the supra rear held up to it.
Aaron --------------------  |
|
Mar 7, 2004 - 6:00 PM
|
|
 Enthusiast Joined Mar 23, '03 From New Orleans Currently Offline Reputation: 5 (100%) |
should look awesome when you get everything flush. Will look really great.
|
|
Mar 7, 2004 - 6:40 PM
|
|
||
 Enthusiast Joined Sep 5, '03 From Grapevine, TX Currently Offline Reputation: 0 (0%) |
Intercooler's too small.. oh, poor baby, wha wha wha, my intercooler is too small.. waaaaaaaaaaa lucky bastard.. with the intercooler.. and the turbo.. and the vroom vroom |
||
|
Mar 7, 2004 - 10:50 PM
|
|
||
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
LOL I'm kinda partial to that intercooler... now I gotta get a bigger shinnier one
-------------------- 99 project version 3.0.. hello SEMA 2010 =) |
||
|
Mar 9, 2004 - 12:22 AM
|
|
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
went to that junk yard today.... FU*K that place!!!!! Had the worst experince ever there... so neone that wanted parts I'm sorry but that place won't get a dime of my money or time... So im really sorry about the parts
did end up goin to another junk yard though and got a few parts that I wanted for a project idea there outta a 5th gen  also did a little bit on the sideskirts but not much..just a little sanding and removed all the prep stuff...heres a few pics   Once agian to all the people that had asked for parts - I'm sorry. This post has been edited by NEVERSTOP: Mar 9, 2004 - 11:45 AM -------------------- 99 project version 3.0.. hello SEMA 2010 =) |
|
Mar 9, 2004 - 8:02 AM
|
|
 Enthusiast Joined Nov 4, '02 From Hecho en la Republica Dominicana/Living in NJ Currently Offline Reputation: 0 (0%) |
OK Neverstop... it's time for you to stop posting all those damn pictures... cause now all i want to do it do all this crazy stuff to my celica... DAMN YOU NEVERSTOP DAMN YOU.... lol j/k... stuff is looking great can't wait to see the end product..
-------------------- |
|
Mar 10, 2004 - 6:10 AM
|
|
||
 Enthusiast Joined Nov 13, '02 From Hawaii Currently Offline Reputation: 0 (0%) |
That why he's called "NEVERSTOP"
--------------------  =( |
||
|
Mar 10, 2004 - 8:07 AM
|
|
||
 Enthusiast Joined Oct 24, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
Man I wish i could have your exhaust at the price you got it. I have to pay 3 times as much to get it in my country. Its on my "to do next " things though. Your car is awesome. Any projections as to when it will be finished? This post has been edited by neoklis: Mar 10, 2004 - 8:16 AM |
||
|
Mar 10, 2004 - 11:33 AM
|
|
||||
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
actually its my old Graf name... then it became NEVERSTOP PRODUCTIONS which is a term for all my DJin stuff... now its just kind of an name for me
Im thinkin about selling it actually, gonna take a look agian at it next sunday.. I might be able to shorten down the pipe in one area and make it fit but prolly just gonna sell it cuz I dont feel like messin with my gastank agian.. so if your interested I'll sell it to you for what I paid plus shipping - PM me if your interested. as for it being finished - I hope by summer, if I dont finish it this year im just gonna sell the thing and get another truck serioulsy though everything is movin right on schedule, once it gets a little warmer out I will be able to work on it every morning before work and then I will fly with it instead of the 6 hrs a week I get now
-------------------- 99 project version 3.0.. hello SEMA 2010 =) |
||||
|
Mar 15, 2004 - 7:47 PM
|
|
|
Enthusiast Joined Mar 4, '03 Currently Offline Reputation: 0 (0%) |
Don't you have to go over the axle with the exhaust pipe just behind the muffler? That piping looks like it would need a bit more of a bend...
Looking good though, now comes the hard work on the front bumper, because that looks like it REALLY needs a lot of work eh dude. Especially seeing as the rounded fittings around the lights comes out further than the bottom half, also I reckon getting a smooth, symmetrical slope from the bonnet down to the bottom half is gonna be hard. GL & Hanging for more pics man (no net at home atm  )kamix. |
|
Mar 15, 2004 - 10:49 PM
|
|
||
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
Good and bad news this time... Got ALOT done on the front.. infact im just about done with the fiberglassing.. unfortunatly (bad news) my digi camera took a crap on me saturday night.. so.. no photos as of yet. But will explain a little... the center of the front (between high beam headlights) is completely glassed in, Took me a couple tries to build up enuf fiberglass ( alot of chesse grattin and sanding then refiberglassin )... but finally got it pretty flush.. I still need to sand everything smooth but am waitin until next week. I also got some filled in on the passager front side.. didnt mess with the driverside cus I still have a small fitment issue there but think I got it figured out I really wish my camera hadn't broke.. cuz It looks awesome and I really wanna show you guys.. but cant at the moment.
Its not that hard.. infact the front went easier so far than the sideskirts have.. but my arms are really tired from the sandin I did have to do to the front sofar also almost had a worst nightmare come true... Have been tring to do something to my hood.. that last 2-3 weeks.. and I had it unbolted and propped up by the beam for holding the hood up.. and the wind started to blow the hood off the car! ( got really windy for a while and did it quick).. I managed to get my arm threw the main opein quick enuf to where it didnt get damaged but walked away with a good bruise and a sore arm for the effort though. Hopefully next week goes a little better for me and I hope to have some photos up sometime this week for you guys. -------------------- 99 project version 3.0.. hello SEMA 2010 =) |
||
|
Mar 15, 2004 - 11:44 PM
|
|
 Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
keep up the work it sounds great
-------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Mar 18, 2004 - 2:32 PM
|
|
|
Enthusiast Joined Oct 24, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
Hey man, one Q for u,
What are you going to do for that little gap between the bumper and the GT4 hood? furthermore did you solve the problem of the latch? as i understand that the GT4 hood does not safely close with the original latch of your car. |
|
Mar 18, 2004 - 11:47 PM
|
|
||
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
for the gap I will make a section that comes up to the hood just like on a GT4 front. as for the latch.. if everything works out how I plan I will have no need for a hood latch.. well at least the type there normally is
-------------------- 99 project version 3.0.. hello SEMA 2010 =) |
||
|
Mar 19, 2004 - 10:28 AM
|
|
|
Enthusiast Joined Jan 16, '03 From Wichita KS Currently Offline Reputation: 0 (0%) |
you have to get a camera i really want to see picks of that front, it will look so good i have always loved that front
Nice work!! |
|
Mar 22, 2004 - 12:36 PM
|
|
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
well worked on it some more yesterday.. got the front center almost competley done.. it's sittin with primer on it to check for any high/low spots which I do have a few but nothing major. as for a camera.. not yet.. infact I need to call HP about my warrantly... newayz I think I might go buy a cheapy one for right now just so I can take a few pics to show you guys...then return the thing later
-------------------- 99 project version 3.0.. hello SEMA 2010 =) |
|
Mar 22, 2004 - 12:41 PM
|
|
||
 Enthusiast Joined Sep 29, '02 From Sterling Heights, Michigan Currently Offline Reputation: 0 (0%) |
DO IT DO IT DO IT!! hehe You just like to tease Neverstop! It's all good though.
|
||
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 4:49 PM |