 17 7J +45 Off wheels on GT4, without spacers |
  |
 Dec 26, 2012 - 12:53 PM
|
 
|
 Enthusiast  Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%)  |
Hello guys.
At last I'll get my all time favorite wheels very soon.  Till I get, I have such question.] I'm going to buy spacers too, but just for information can I install them on my GT4 without spacers? I mean a front one. Thanks -------------------- |
|
Dec 26, 2012 - 7:17 PM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
oem is 7.5 inch wide. so you might hit or miss. your really just taking the chance.
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Dec 26, 2012 - 8:29 PM
|
|
|
Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
QUOTE (BonzaiCelica @ Dec 26, 2012 - 8:17 PM)  oem is 7.5 inch wide. so you might hit or miss. your really just taking the chance. I can install any wheels with hubcentric spacers, right? This post has been edited by Red123: Dec 26, 2012 - 8:29 PM -------------------- |
|
Dec 26, 2012 - 8:44 PM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
depends on the spoke design,
stock rims have curved spokes to just barely avoid the brakes by 1-2mm, the same offset wheels with flat spokes will probably grind off the celica lettering from your brakes -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
|
Dec 26, 2012 - 10:53 PM
|
|
 Moderator Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) |
get a test fit done first before you buy
-------------------- |
|
Dec 27, 2012 - 9:18 AM
|
|
|
Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
Thanks.
I hope I'll install them with spacers  
-------------------- |
|
Jan 7, 2013 - 11:34 PM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
your offset is high not sure if the spokes would hit those big brakes. test fit is best or someone who has run a similar or close spec wheel on theirs. With spacers, for sure you'll clear them.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Jan 8, 2013 - 10:19 AM
|
|
|
Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
QUOTE (trdproven @ Jan 8, 2013 - 12:34 AM) your offset is high not sure if the spokes would hit those big brakes. test fit is best or someone who has run a similar or close spec wheel on theirs. With spacers, for sure you'll clear them. Thanks They were my favorite wheels for a long time. So now I have a chance to install them on my celica. p.s. As I know there's no gt4 on regamasters, right? or maybe no pics. 
This post has been edited by Red123: Jan 8, 2013 - 10:49 AM -------------------- |
|
Apr 30, 2013 - 6:46 AM
|
|
|
Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
can't install +45 17 front wheels. need min 15mm spacer.
-------------------- |
|
Apr 30, 2013 - 7:23 AM
|
|
 Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
the backspacing on those looks to be very minimal. yeah, they definitely wont fit
--------------------  1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Apr 30, 2013 - 9:43 AM
|
|
|
Enthusiast Joined Jul 31, '12 From England Currently Offline Reputation: 0 (0%) |
I'm inclined to say you'll need MINIMUM 10mm spacers,
A friend of mine has had numberous sents of alloys (Kei Velocity 18's, Lenso RS5 18's, Toora 18's and the majority of them have needed spacers) As said before as they have a flat face to the rim they'll leave you less clearance and as you've got ET45 you're going to be very sunk in the arch anyways. I'd be inclined to say get some 15mm spacers to bring the ET to 30, you'll need longer studs though and then you should be fine 
|
|
Apr 30, 2013 - 1:56 PM
|
|
|
Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
QUOTE (sr666 @ Apr 30, 2013 - 9:43 AM) I'm inclined to say you'll need MINIMUM 10mm spacers, A friend of mine has had numberous sents of alloys (Kei Velocity 18's, Lenso RS5 18's, Toora 18's and the majority of them have needed spacers) As said before as they have a flat face to the rim they'll leave you less clearance and as you've got ET45 you're going to be very sunk in the arch anyways. I'd be inclined to say get some 15mm spacers to bring the ET to 30, you'll need longer studs though and then you should be fine thanks. yesterday I've ordered 20mm spacers. what do you think will it be ok fitment? front +20mm and rear +25mm ? -------------------- |
|
Apr 30, 2013 - 2:04 PM
|
|
|
Enthusiast Joined Jul 31, '12 From England Currently Offline Reputation: 0 (0%) |
I'd say it should be ok just be sure that your car isn't too lowered else you'll need your arches rolling etc so it's more grief than it's worth IMO
|
|
Apr 30, 2013 - 5:21 PM
|
|
|
Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
QUOTE (sr666 @ Apr 30, 2013 - 2:04 PM) I'd say it should be ok just be sure that your car isn't too lowered else you'll need your arches rolling etc so it's more grief than it's worth IMO Thanks. I'll see. -------------------- |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 5:02 AM |