6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> ST 7AFE Distributor, Now is not starting
post May 3, 2013 - 2:16 PM
+Quote Post
yagamius



Enthusiast
**
Joined Feb 18, '09
From Costa Rica
Currently Offline

Reputation: 4 (100%)




As the Title said I need the Distributor part number for an AT200 1.8 7AFE.

I finish to rebuild my the engine and when I was about to start didn't received spark, I open it and the Igniter coil had all the copper cables out, so is dead.

I planing to buy a new one but I need to confirm the part number.

This post has been edited by yagamius: May 7, 2013 - 7:49 AM


--------------------
1994 ST Celica --> no swap --> 7A rebuild
1974 Mustang --> Almost Restored
post May 3, 2013 - 8:02 PM
+Quote Post
fatherof4



Enthusiast
*
Joined Sep 25, '11
From GreatSmokyMtns NC
Currently Offline

Reputation: 3 (100%)




As far as I can tell there are a few numbers for the 7afe. Not sure about the difference between them. 19050-74010... 19050-74020... 19050-74030... 19050-74040


--------------------
"Wheelman" for the Cardboard Mafia"

https://www.facebook.com/robert.davis.520
post May 4, 2013 - 4:35 PM
+Quote Post
onnaj

Enthusiast
**
Joined Sep 6, '12
From Holland
Currently Offline

Reputation: 1 (100%)




QUOTE (yagamius @ May 3, 2013 - 9:16 PM) *
As the Title said I need the Distributor part number for an AT200 1.8 7AFE.

I finish to rebuild my the engine and when I was about to start didn't received spark, I open it and the Igniter coil had all the copper cables out, so is dead.

I planing to buy a new one but I need to confirm the part number.


Hello,

You best check on toyodiy.com. There will be the correct part number. Otherwise call your local Toyota dealer for the number. You can even ask them for discounts, most of the times they'll do.


--------------------
post May 7, 2013 - 7:48 AM
+Quote Post
yagamius



Enthusiast
**
Joined Feb 18, '09
From Costa Rica
Currently Offline

Reputation: 4 (100%)




I bought a new distributor and the car still not starting. there is something electric and is not going to the distributor.

what I notice is that the Check Engine Light is not on when I set the key to ignition frown.gif tried with the scanner and is not getting signal either I'm hopping is not the ECU because I removed the cluster fuse and the engine light goes on but blinking and the temp goes high with the car Off so there is something electric going on.

any Idea ?



--------------------
1994 ST Celica --> no swap --> 7A rebuild
1974 Mustang --> Almost Restored

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 6:13 PM