 aftermarket remote locking |
  |
 Jul 9, 2013 - 11:22 AM
|
 
|
|
Enthusiast  Joined Oct 30, '12 From Cheshire Currently Offline Reputation: 0 (0%)  |
Hi guys. Fitting a hawk universal remote locking system. Sussed out the door polarities etc so 99% confident wiring this in but.....need to know where to take a permanent live from? Hawk have told me the white thick wire in the steering column but the only thick wire is white and black, I dont think this would be a perm live anyway? any ideas appreciated. I did use the search before some wise ass replies with that
 looks like there is a thick white going into the back end of the ignition barrell.....99 st btw. Thanks in advance 
|
|
Jul 9, 2013 - 12:31 PM
|
|
 Enthusiast Joined Jul 17, '12 From Slovenia Currently Offline Reputation: 0 (0%) |
Here I found a quick cheat sheet for basic wiring, I also installed an alarm a year ago so I can say it's correct as far as I can remember it...
It says WHITE or BLACK/RED from the ignition harness, because 12V constant voltage is on both wires. But you can easily make sure which wire does what with voltmeter. -------------------- |
|
Jul 9, 2013 - 12:38 PM
|
|
|
Enthusiast Joined Oct 30, '12 From Cheshire Currently Offline Reputation: 0 (0%) |
QUOTE (Nihil @ Jul 9, 2013 - 1:31 PM)  Here I found a quick cheat sheet for basic wiring, I also installed an alarm a year ago so I can say it's correct as far as I can remember it... It says WHITE or BLACK/RED from the ignition harness, because 12V constant voltage is on both wires. But you can easily make sure which wire does what with voltmeter. You're a star my man, thank you. That cheat sheet is gonna come in handy
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 5:04 PM |