 How to: axle spacer on 3sgte swap, using hybrid axles on e153 tranny |
  |
 May 9, 2013 - 9:50 AM
|
 
|
 Enthusiast  Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%)  |
I realized that there is no much info about this spacer and I thought this might be helpfull for some people using e153 tranny on their swap.
I used lsd mr2 inners and st185 outters If you bolt the mr2 inners to the tranny and st185 to the hub you will have a gap of about 1/2 inches in the middle of the 2 axles.  The spacerr was made out of the mr2 axle. This is the piece you remove from the mr2 axle to make the hybrid one.  You need to cut this section which measures exactly 1/2 inch  Then take the spacer to a machine shop to make the surface flat and flush   Mount it to the st185 axle   And get longer bolts and you are ready to install it  --------------------  |
|
May 9, 2013 - 11:37 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
excellent write up.
I find it really interesting that im using an E153 with MR2 LSD inners as ST185 outters and no spacer. i have had no problems at all. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
May 9, 2013 - 12:31 PM
|
|
|
Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
QUOTE (Smaay @ May 9, 2013 - 12:37 PM)  excellent write up. I find it really interesting that im using an E153 with MR2 LSD inners as ST185 outters and no spacer. i have had no problems at all. Thanks and yes it can be installed without the spacer but the axle gets streched about 1/2 inch and the cage from the st185 ends up coming out and breaking it (sometimes) And if you lower the car I believe it stretches more and the cage breaks faster, which happened to me after 1 month after the swap. -------------------- |
|
Jun 22, 2013 - 2:41 PM
|
|
|
Enthusiast Joined Nov 15, '08 From Raleigh NC Currently Offline Reputation: 1 (100%) |
What did you use to cut the hard steel? I took the axle to a machine shop and he couldn't cut it
|
|
Jun 22, 2013 - 4:48 PM
|
|
|
Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
QUOTE (TwistedCeli94 @ Jun 22, 2013 - 3:41 PM) What did you use to cut the hard steel? I took the axle to a machine shop and he couldn't cut it I used a grinder, used a wheel for metal. It takes some time to do it but it cuts it. Then take it to the machine shop to leave the surface even -------------------- |
|
Jun 23, 2013 - 11:46 AM
|
|
|
Enthusiast Joined Nov 15, '08 From Raleigh NC Currently Offline Reputation: 1 (100%) |
K great thanks....also maybe this is a stupid question but if you need the mr2 inner...how are you cutting it up? I thought I used the left over parts to make it the 1/2 inch spacer
|
|
Sep 11, 2013 - 10:44 PM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
this isn't stickied?? the other 13 page stickied thread just seems full of lots of talk.
This post has been edited by BonzaiCelica: Sep 11, 2013 - 10:44 PM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Sep 13, 2013 - 2:07 PM
|
|
|
Enthusiast Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%) |
Whats the new bolt size?
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 5:34 PM |