 Alumaloy is awesome! |
  |
 Oct 12, 2013 - 6:41 PM
|
 
|
 Enthusiast  Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%)  |
I just made this video on using this stuff to "weld" a bung on my i/c piping. It acts more like solder, but has a high melting temperature and it's used for aluminum repairs. You guys should seriously buy some. I've worked on cars with cracked intake manifolds that this stuff would have worked great on if I had known about it. I don't think it would be very good at making a full i/c piping set compared to welding. It is airtight and it holds the 15-ish lbs I'm pushing with the stock turbo, but the two pipe scraps that I joined together have to be at least 1/8th of an inch apart to sturdily join together, and it runs like a liquid on rounded surfaces. If the gap is too small it only bonds to the top surface. It's also called wizardweld and durafix. Solid stuff, I keep checking the bung I put on and it is still there. High tensile strength stuff..75% zinc alloy I think.
http://www.youtube.com/watch?v=mQw9Xt6EJN8 -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
|
Oct 12, 2013 - 7:14 PM
|
|
 Enthusiast Joined Jan 4, '12 From US Currently Offline Reputation: 6 (100%) |
That stuff seems pretty neat... I also need to get a bung on my charge pipe. How much did the alumaloy set you back?
-------------------- 1993 Celica GT Coupe - sold
1994 Celica GT Liftback |
|
Oct 12, 2013 - 8:23 PM
|
|
 Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
I had some of this a while back, apparently it didn't fix the hole in my 1mz v6 block. lol
This post has been edited by soulshadow: Oct 12, 2013 - 8:23 PM |
|
Oct 12, 2013 - 9:43 PM
|
|
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
QUOTE (soulshadow @ Oct 12, 2013 - 3:23 PM)  I had some of this a while back, apparently it didn't fix the hole in my 1mz v6 block. lol haha..you tried it on a block?? lol. It's aluminum..how well does it bond to a block? I've been thinking about repairing the rust spots on my truck with it. This post has been edited by match220: Oct 12, 2013 - 9:44 PM -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
|
Oct 12, 2013 - 9:46 PM
|
|
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
QUOTE (Syaoran @ Oct 12, 2013 - 2:14 PM) That stuff seems pretty neat... I also need to get a bung on my charge pipe. How much did the alumaloy set you back? the alumaloy alone was maybe $15 for about 10 rods. Then I had to buy the propane and the torch adapter, which was under $25. I would pay a welder twice that here. -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
|
Oct 12, 2013 - 9:56 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
ive actually had a bunch of that stuff laying around the garage of a few years now, havent had a good reason to use it. glad to hear its worked for ya!!!
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Oct 15, 2013 - 2:15 PM
|
|
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
I think it works pretty poor on anything but super thin things. Aluminum disperses heat very quickly and anything thick disperses the heat and it wont bond.
-------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 2:42 PM |