Team Reynolds Style, Next Race: July 25/26 Autobahn Country Club Options

[qatar11]

Because building a GT4 is clearly not enough work... I have a race car - not hard core performance rally like Steve... but we have been known to pull down a trophy.... Here is a very high level of the car's progression since 2009. I took this year (2013) off as I was completely burnt out and broke... 2014... I cannot wait!

















Whelp.... if there is some interest, I can keep posting some photos and progress as we work toward April 2014 @ Gingeman Raceway...

This post has been edited by qatar11: May 25, 2015 - 8:17 AM

[JoshuaM]

RACE CARRRR!!! XD XD XD

Whelp.... if there is some interest, I can keep posting some photos and progress as we work toward April 2014 @ Gingeman Raceway...

Please do!

[Keiri]

Sweet, sweet progress!

Love the look of Celicas running in motorsports.

[Tigawoods]

hire me! I wanna race with ya!

Looks fun! Awesome cage to haha

[qatar11]

hire me! I wanna race with ya!

Looks fun! Awesome cage to haha

The cage is pretty solid... Lemons/Chump safety rules have matured to the point that the care are a log book away from NASA/SCCA eligibility.

[czwalga]

2014.... i'm pretty sure you're running an awd celica rally car in 2014 right??????


Haha, nice work.

[Box]

Sooo out of place and awkward...

[qatar11]

2014.... i'm pretty sure you're running an awd celica rally car in 2014 right??????

I'm going to need a bigger race budget...

[cardshark525]

My car will get there over the course of the next year. Glad to see others are into it as well. Having a fast car on the streets is fun but I have no intention of getting into trouble that way and it's so much different than driving in Europe (I'm originally from Croatia). There's so much more traffic here and the highways are flat out not made for it especially after trucks put nice groves into the roads lol.


I do have two questions for you though, what size rims/tires are you running, and do you have as much trouble with understeer as I would expect or have you found a way to counteract it/negate it?

[SwissFerdi]

2014.... i'm pretty sure you're running an awd celica rally car in 2014 right??????

That does seem a natural progression, your car would be well cared for I think.

[qatar11]

My car will get there over the course of the next year. Glad to see others are into it as well. Having a fast car on the streets is fun but I have no intention of getting into trouble that way and it's so much different than driving in Europe (I'm originally from Croatia). There's so much more traffic here and the highways are flat out not made for it especially after trucks put nice groves into the roads lol.


I do have two questions for you though, what size rims/tires are you running, and do you have as much trouble with understeer as I would expect or have you found a way to counteract it/negate it?

We have never really experienced understeer on the race track... Mind you that is a prepared surface... We run 15" OE GT wheels, Falken Azenis Rubber. KYB GR2 Shocks. Vogtland Springs. Normal Sway Bar. EBC Yellow Brakes. We run OE toe, -2.5 Negative front and -1.5 Negative rear camber.

Towards the end of the tire life we will start to get understeer... which is about 8-10 hours of track time.

This post has been edited by qatar11: Oct 22, 2013 - 9:21 PM

[cardshark525]

Nice to see most of the track parts I was looking at are what you are running. Will probably look at Nitto NT01's for tires since I was really impressed by their performance and life. Did you swap the front rotors to accommodate the EBC Yellow's? I ran EBC green and then Hawk HP's on my old Celica (not track car) and was impressed by both for street use (will be using yellow for track as well).

My car will get there over the course of the next year. Glad to see others are into it as well. Having a fast car on the streets is fun but I have no intention of getting into trouble that way and it's so much different than driving in Europe (I'm originally from Croatia). There's so much more traffic here and the highways are flat out not made for it especially after trucks put nice groves into the roads lol.


I do have two questions for you though, what size rims/tires are you running, and do you have as much trouble with understeer as I would expect or have you found a way to counteract it/negate it?

We have never really experienced understeer on the race track... Mind you that is a prepared surface... We run 15" OE GT wheels, Falken Azenis Rubber. KYB GR2 Shocks. Vogtland Springs. Normal Sway Bar. EBC Yellow Brakes. We run OE toe, -2.5 Negative front and -1.5 Negative rear camber.

Towards the end of the tire life we will start to get understeer... which is about 8-10 hours of track time.

This post has been edited by cardshark525: Oct 22, 2013 - 10:25 PM

[qatar11]

Nice to see most of the track parts I was looking at are what you are running. Will probably look at Nitto NT01's for tires since I was really impressed by their performance and life. Did you swap the front rotors to accommodate the EBC Yellow's? I ran EBC green and then Hawk HP's on my old Celica (not track car) and was impressed by both for street use (will be using yellow for track as well).

We cannot run the Nitto tire (it looks like a nice tire) as the tread wear rating (100) is below the 24 hour of Lemons minimum (180). The front brakes are ST185 Calipers and Rotors which cross listed with Camry parts.... which means spares are exceedingly cheap ($45 for rebuilt caliper, $30 for a rotor). It is not exactly a direct fit... I have a machine shop open up the hole in the center of the rotor and you need to offset the caliper with washers... but it has worked well so far. The EBC yellows are an amazing pad- I would like to actually try the Hawk pad but we never have the car in a position where we can test and compare results so we have been sticking with EBC Yellow for now.



First Race Car Build Night is in the books... All the Spare Parts have been inventoried and we took the tarp off to check on the condition of the engine bay. Next week the engine will come out as it has a spun rod bearing and we'll try to get some work done before the weather really goes to pot.... we really need to do something about that air intake...



This post has been edited by qatar11: Oct 23, 2013 - 6:41 AM

[qatar11]

Still trying to work out the kinks with the GoPro time lapse... will try again next week.

[H8TRAIN]

The work. The photography. The firechickens. I am entertained.

[qatar11]

"Not that we needed all that for the trip, but once you get locked into a serious drug collection, the tendency is to push it as far as you can"
-HST
Tore down 2 engines today... they will be joining a 3rd at the machine shop for hot tanking and hone/polishing/etc...

just some random photos of the shinanigans...

[czwalga]

I NEED LAT LINK DIMENSIONS!!!!!!!!!!!!!!!!!!!!!!!!!! haha.

[SwissFerdi]

That is a serious parts resource you've there. Half the Celica's engines...

[qatar11]

Boring Update:

I got 1 set of Cams / Crank back from the Machine shop... Dropped off 3 blocks 2 more cranks and 2 more sets of cams... going to go through all the pistons/rods lying around and figure out how to get those cleaned as well... once everything is back home... it will be time to do some serious measuring... and maybe balancing?? hrm...

[qatar11]

Hopefully there is 2 good heads out of this mess, from Left to Right

2011 Nelson Ledges - Overheated
2012 Autobahn Country Club - Spun Connecting Rod
2012 Daily Driver - Dirty Dirty Dirty


Random Pistons