 3SGTE, No A/C No Problem |
  |
 Apr 29, 2006 - 5:39 PM
|
 
|
 Moderator  Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%)  |
I did a little work trying to figure out how to properly delete the A/C compressor.
This is the old set up I had.  Clearly not the right way. After looking at a EPC and going to Toyota we have found this.    Pulley part number - 16603-88360 Belt - 99365-21010 This is a perfect way to delete the A/C compressor using all stock toyota parts. Happy Boosting DEF --------------------  I will return one day. |
|
Apr 29, 2006 - 7:28 PM
|
|
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
when I recieved my 3s-gte from japan someone took the a/c compressor off by putting about 10 nuts to make up for the compressor and the bracket and a smaller belt. If you guys want pics or more part #'s let me know.
|
|
Apr 29, 2006 - 7:44 PM
|
|
|
Enthusiast Joined Aug 14, '04 From Toledo, Ohio Currently Offline Reputation: 0 (0%) |
im sorry, but what exactly does this do? mine is like your fist pic. how much do those parts cost? i have a squeaking noise coming from that pulley and this might fix it
|
|
Apr 29, 2006 - 7:49 PM
|
|
 Enthusiast Joined Mar 17, '05 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
QUOTE(gtfc115 @ Apr 29, 2006 - 7:44 PM) [snapback]427983[/snapback] im sorry, but what exactly does this do? QUOTE(defgeph @ Apr 29, 2006 - 5:39 PM) [snapback]427952[/snapback] how to properly delete the A/C compressor. --------------------  1994 ST205 Celica GT-FOUR Group A WRC - running in new engine 1993 Rover 220 GTi tarmac rally car (under construction) 3SGE power here we come.... GT-Four spec list |
|
Apr 29, 2006 - 11:30 PM
|
|
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
QUOTE(gtfc115 @ Apr 29, 2006 - 8:44 PM) [snapback]427983[/snapback] im sorry, but what exactly does this do? mine is like your fist pic. how much do those parts cost? i have a squeaking noise coming from that pulley and this might fix it This will definatly take car of any sounds you may have. The pulley and the belt are a little more than $100. I'm very happy to have this new pulley and belt. It was a PITA to get the old belt on and off. This fits like a glove. And, this is to completely remove the A/C compressor. No more guessing which belt should work, this is real world tested. DEF -------------------- I will return one day. |
|
Apr 30, 2006 - 7:35 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
glad to see you got everything sorted out with that
 nice job RC King -------------------- |
|
Apr 30, 2006 - 7:51 AM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
Good work. But, I have a question. When you are traction limited with speed anyway, why would you want to remove the air conditioning in your car?
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Apr 30, 2006 - 8:17 AM
|
|
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
I don't drive this car everyday, A/C isnt a big deal for me. If its hot out I have the windows down.
-------------------- I will return one day. |
|
Apr 30, 2006 - 11:55 AM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
Jeff:
Everyone who eliminates their A/C always says its no big deal. I can understand that argument if there is something to be gained by doing so because the "no big deal" part is always modified by the implied "because I can go faster without it". What have you gained here? You have indicated a number of times that traction limits your ability to take the car further, so how could this weight savings or the elimination of this power drain be helping you in any way? Jay -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Apr 30, 2006 - 12:02 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
jay, i dont think jeff did it for the weight savings, or power drain.
i think its more if just the fact he didnt feel like going thru the trouble of properly installing and refilling the A/C system when the car dont see daily driving action. like he said, if its hot, just roll down the windows. =) -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Apr 30, 2006 - 12:05 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(presure2 @ Apr 30, 2006 - 12:02 PM) [snapback]428192[/snapback] jay, i dont think jeff did it for the weight savings, or power drain. i think its more if just the fact he didnt feel like going thru the trouble of properly installing and refilling the A/C system when the car dont see daily driving action. like he said, if its hot, just roll down the windows. =) makes sense. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Apr 30, 2006 - 3:06 PM
|
|
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
QUOTE(jgreening @ Apr 30, 2006 - 1:05 PM) [snapback]428195[/snapback] QUOTE(presure2 @ Apr 30, 2006 - 12:02 PM) [snapback]428192[/snapback] jay, i dont think jeff did it for the weight savings, or power drain. i think its more if just the fact he didnt feel like going thru the trouble of properly installing and refilling the A/C system when the car dont see daily driving action. like he said, if its hot, just roll down the windows. =) makes sense. Yeah, thats about it in a nut shell. I had no use for the compressor. Rather leaving it there useless I chose to remove it.
-------------------- I will return one day. |
|
Apr 30, 2006 - 3:56 PM
|
|
|
Enthusiast Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) |
What if you put the belt under the pully like stock instead of over it? What's the difference?
|
|
Apr 30, 2006 - 8:49 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
in the ST to run a/c you have to get a GT hardlines, compressor and i think a condenser(not sure if thats the same on both cars) but the ST hardlines bend differently...so if you don't want the hassle of finding the new GT parts for your ST swap then this is the way to do it...
nice one jeff! |
|
Apr 30, 2006 - 8:56 PM
|
|
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
Check out the first pic I posted, thats the belt back sided. The problem is when you delete the A/C compressor you have to find a shorter belt. So I found a shorter belt problem solved. So I thought.
The reason why the setup in Pic 1 doesnt work well, is because the belt that works that way is so short. You need to remove the alt to get the belt on. Not to mention the occasional skreeching from a wet belt. So why not front side the belt on the stock pulley ? Sure it will work, but for how long ? I had the belt run like that but I was not happy. Say something were to happen the belt could pop off the pulley, there are no grooves holding it in place. So that brings me to this set up. The belt is not loose, I dont have to remove the alt to get the belt on, I dont have those annoying sounds coming from the belt everytime it rains, I'm 100% positive the belt wont slip off the pulley. I did this so I had one less thing to worry about breaking. -------------------- I will return one day. |
|
May 1, 2006 - 12:18 AM
|
|
 Enthusiast Joined Oct 13, '02 From Blairstown, New Jersey Currently Offline Reputation: 6 (100%) |
Nice job Jeff.
You should update your title to the "AC King".
-------------------- 3rd gen ST205 3SGTE - Alive and boosting. |
|
Nov 10, 2006 - 5:30 PM
|
|
|
Enthusiast Joined Apr 26, '04 From London Currently Offline Reputation: 0 (0%) |
 Try this setup, now you can run anything you wont with as much power as you like!!! -------------------- More Power to your BOOM BASS |
|
Nov 10, 2006 - 5:45 PM
|
|
 Enthusiast Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) |
QUOTE Pulley part number - 16603-88360 Belt - 99365-21010 This is a perfect way to delete the A/C compressor using all stock toyota parts. woot just what i was looking for. -------------------- |
|
Nov 12, 2006 - 12:26 PM
|
|
 Enthusiast Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) |
Nice job Jeff.
First time I have EVER seen anyone do it the right way. Usually they just run the belt like you have it now, but with the smooth pulley. Not something I would be comfortable with either...... --------------------  |
|
Nov 19, 2006 - 7:01 PM
|
|
|
Enthusiast Joined Sep 9, '02 From Scranton, Pa Currently Offline Reputation: 7 (100%) |
QUOTE(playr158 @ Apr 30, 2006 - 6:49 PM) [snapback]428368[/snapback] in the ST to run a/c you have to get a GT hardlines, compressor and i think a condenser(not sure if thats the same on both cars) but the ST hardlines bend differently...so if you don't want the hassle of finding the new GT parts for your ST swap then this is the way to do it... nice one jeff! and it is quite a pain the ass finding everything! |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 2:04 AM |