 No low ligths, ????? |
  |
 Jul 31, 2014 - 8:30 PM
|
 
|
|
Enthusiast Joined Jun 28, '13 From México Currently Offline Reputation: 0 (0%)  |
No low ligths.... I've check all fuses/ relay and all are in good shape.... Back ligth and instrumental panel ligths up normal.... Battery I think is Ok!! Anyone has this problem?? Almost one year ago I've swap ligth switch from a 96 (the one with the fog ligths switch)
|
|
Jul 31, 2014 - 8:38 PM
|
|
|
Enthusiast  Joined Jan 13, '12 From Georgia Currently Offline Reputation: 3 (100%) |
They normally don't both blow at the same time but it has happened to me before on other cars. Have you checked the bulbs themselves
-------------------- 97 Celica GT liftback DD/ project
96 corolla back up DD |
|
Jul 31, 2014 - 10:19 PM
|
|
 Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
I would start at the switch, maybe a connection or something came loose.
I doubt bouth bulbs blew at ones, but it wouldn't hurt to check that too -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
|
Jul 31, 2014 - 11:24 PM
|
|
|
Enthusiast Joined Jun 28, '13 From México Currently Offline Reputation: 0 (0%) |
Bulbs are in good shape!!! If I pull for high ligths the 4 ligths turns on.... So bulbs is not the cause!! I've change the relay and same diagnosis!!
|
|
Aug 1, 2014 - 3:45 AM
|
|
|
Enthusiast Joined Jul 1, '14 From Hawaii Currently Offline Reputation: 3 (100%) |
QUOTE (Toyo6g @ Jul 31, 2014 - 11:24 PM)  Bulbs are in good shape!!! If I pull for high ligths the 4 ligths turns on.... So bulbs is not the cause!! I've change the relay and same diagnosis!! The highlights bringing on all 4 indicate that its not the wiring between the relays and the bulbs. So now that, thats eliminated you know its either the wiring between the switch to the relay, or the wiring between power to the switch. Then again, it could be the switch assembly, try your old one and check the results to see if they come on with two turns back, and then stay on with the highlights. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 1st, 2024 - 7:38 PM |