How To: Cleanly Wire HID's in an ST, How i did my wiring and mounting. (56K warning) Options

[phonex98]

Just thought i'd post this incase any ST owners wanted an idea of how to run their wiring. I like my car clean so this install took ~ 2.5 hrs, that, and the fact im not very mechanically inclined.

RELAY + GROUND
*Mounted near centre firewall, there was a screw hole there. I found a screw that fit from my tool box and mounted the relay.*




WIRING TO R HEADLIGHT +WIRING TO BATTERY
*Ran the wiring to the positive battery terminal under the air filter box, and up the positive sheath. Unscrewed the positive lead that goes to the engine, inserted my positive wire and rescrewed the bolt. Wiring to R headlight went between the air box and the body. Didnt even have to use zip ties here. Also this i where i plugged in the wire that had to goto your old light wiring.





BALLAST R
Look carefully below my battery, under coolant line. Mounted with double sided tape (first i cleaned both surfaces with alcohol) and zip tied it incase the tape ever comes loose.





WIRING TO L HEADLIGHT
This wiring followed the tubes that run along the firewall all the way up to near the headlight







BALLAST L
Easiest mount by far. Double sided tape + zip ties to mount to body part right under relay box.




FINAL PRODUCT + NOTES
In total i used about 25 zip ties to hold the wiring to places car. Dont be afraid to use too many, just make sure you snip the ends off after and rotate the ties so you cant see the stopper (i know, im obsessive compulsize). Also, when inserting the bulbs there is only ONE correct way to put them in, so double check you are inserting them right the first time. I had to re-insert a few times and im sure it took a bit of life off my bulbs!
Double check your wiring, let loose your clutch (keep e-brake on) and take a look. This is with high beams on so i can see the contrast! Hope this tutorial-ish is useful for someone.

***Picture taken before i secured my wires, just to test lighting. My wires do NOT run over the battery like the picture would imply***

NIGHT SHOTS
Color looks nice eh?





This post has been edited by phonex98: Oct 22, 2006 - 9:33 PM

[94celicadude]

WOW! that is a great write up, i got my kit but i havent taken the time to look at how i was going to mount it. Now i know EXACTLY how. once again great write up.

I vote sticky this post.

This post has been edited by 94celicadude: Oct 22, 2006 - 7:21 PM

[phonex98]

Thanks bud Even if it just helps one person, this writeup was worth it! Thanks go out to culpable for arranging this GB! If anyone has any questions, go ahead and post. Night shots coming later.

This post has been edited by phonex98: Oct 22, 2006 - 7:39 PM

[GreenyST204]

Cool write up you should make it a How-to
I want HID in my SX

[Batman722]

there has been a lot of info about installing HIDs lately because of the GB, here are some more links with install info

http://www.6gc.net/forums/index.php?showtopic=42363

http://www.6gc.net/forums/index.php?showtopic=42381

http://www.6gc.net/forums/index.php?showtopic=42353

[phonex98]

we should somehow combine them... and make a super how to

[azian_advanced]

wow... everybody's getting hid's nowadays.. nice.

[elvasoshexai]

i really needa clean up the wiring in my engine bay... it's a mess rite now

[presure2]

good job man! added to the stickys!

[LeonStryfe]

Hey dude, what relay and fuse did you use?

[Culpable04]

Hey dude, what relay and fuse did you use?

the relay he used was included on the HID kit of previous orders, they stop including this harness as it was an alternate wiring method, and the kit perform just fine with standard installation

[FreddyTheOthaMea...]

How much did everyone pay for their HIDs?

[Culpable04]

How much did everyone pay for their HIDs?

look at it yourself

HID GB

[denqua]

Hello
How did u do your high beam did u just leave it alone? Did u use both wire from stock or just the red to go into your relay?

[Rayme]

I' am impressed that this car looks like its out of the lot ! Impeccable!

[msk59]

Hello sorry to reserect an old thread but I cannot see any pictures. Is there any way to refresh those?