6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Flasher relay buzzing
post Sep 3, 2014 - 9:02 AM
+Quote Post
Noahwhite2014

Enthusiast
**
Joined Jul 1, '14
From Hawaii
Currently Offline

Reputation: 3 (100%)




So i washed my car a few days ago, then got in and everything seemed fine. Until I used the turn signals. Both sides, when used making a buzzing sound. When I turn off the turn signal, the buzzing goes away. I haven't tested the hazards because I hadn't even thought to check it.

I was going to pull out the flasher relay and check if it was wet. But I haven't had a chance to do so yet (I don't use this car daily yet so I just didn't drive it).

Also yes I used the search but the post I saw it was the opposite way where it would buzz all the time, until the signals were on.

Anyone have any experience with this? I wanted to replace the resistor so my led turns wouldn't hyper flash (and yes they were working before

post Sep 4, 2014 - 1:20 AM
+Quote Post
Noahwhite2014

Enthusiast
**
Joined Jul 1, '14
From Hawaii
Currently Offline

Reputation: 3 (100%)




Problem solved today. Flasher relay is fine. apparently my friend (he was with me when washing my car) unplugged the front turn signal lights and forgot to plug them back in, but put the housing back in the bumper... how stupid.

Well anyway i have led turns in the back and regular bulbs in the front (the bulbs i ordered for the front didn't work properly so i sent them back and should be getting new ones in a week or two).

So for anyone else who has buzzing when the turn signals are on, its either unplugged/drawing too little, or you have a short.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 30th, 2024 - 2:45 AM