 wheel fitment, will these wheels fit fine? |
  |
 Jan 17, 2015 - 4:19 PM
|
 
|
|
Enthusiast  Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%)  |
I plan on getting xx530 wheels very soon
For the fronts im getting 18x8.75 +33, according to the flush fitment guide these wheels will be nearly perfect. My question regards to the rears. I want to get 18x9.75 + 20. Im sure they'll clear the strut (coilover) but not sure about the quarter panel. Flush fitment guide says with 10inch wheels you need +30, Im assuming 10mm wont make much of a difference but what do I know. I was hoping I could run stock camber and didnt want to have to stretch the tires at all. Any help is appreciated -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 6:27 AM |