6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Closed TopicStart new topic
> SOLD Complete running 5S-FE w/ 5spd MT, Wiring Harness, and ECU
post Jan 27, 2015 - 1:45 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




SOLD SOLD SOLD

Hey 6GC,

Like the title says, i have a complete running 5S motor pulled from my 96 Celica ST204. Reason it was pulled; did the 3S BEAMS swap. Engine is in perfect running condition, no knocking or pinging of any kind, no pop outs or grinds from the transmission; everything is included with sale of engine. Local Pick up In SOUTHERN CALIFORNIA (Pasadena) Asking $750 for everything, engine has roughly 140K, yes all fluids have been drained. Shoot me an offer

Heres a link to the craigs ad WITH PICTURES:
http://losangeles.craigslist.org/sgv/pts/4879105351.html

I have separated the Engine from the trans, so i will sell together or individually. I WILL PART OUT, EXCEPT the engine (must purchase the motor as a whole unit). Id rather not part a good running engine.

Up for sale:

5S-FE Engine ~140K
5spd MT w/clutch flywheel pressure plate
MT ECU
Stock Intake
Stock B pipe
Stock Exhaust Manifold
OEM USDM wiring harness - SOLD
AC
PS pump
Alternator
Starter
All sensors

Pretty sure thats everything, just ask if something isnt listed
Everything was working perfectly before it was pulled.

Also if interested i have a few aftermarket parts for the 5S as well:

Header (forgot the brand) $40
Chrome Short Ram Intake with filter $25
Adjustable Cam Gears (Brand new RED) $65

and if you come and buy the engine, you can have w/e misc hoses and extra parts i bought and have not used; if you like of course, i dont think i have a need for any 5S parts.

This post has been edited by ST204BEAMS: Feb 16, 2015 - 12:33 AM
post Jan 27, 2015 - 9:34 PM
+Quote Post
6strngs



Enthusiast
*****
Joined May 12, '06
From Wilmington, NC
Currently Offline

Reputation: 45 (100%)




If it's a cali-spec car, and you decide to part out, I'm very interested in the wiring harness...


--------------------

94 GT - Sold -------- 69 Pontiac Lemans - Sold
88 Alltrac - Sold ---- 04 WRX - Sold
00 GT-S - Sold ------ 91 Miata - project/drift car
95 GT - Sold -------- 96 GT - New Daily Drive
post Jan 29, 2015 - 1:26 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




QUOTE (6strngs @ Jan 27, 2015 - 10:34 PM) *
If it's a cali-spec car, and you decide to part out, I'm very interested in the wiring harness...


Definitely will do
post Feb 10, 2015 - 5:59 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




TTT
post Feb 10, 2015 - 6:22 PM
+Quote Post
Tigawoods



Enthusiast
*****
Joined Dec 22, '06
From Columbia, MD
Currently Offline

Reputation: 13 (100%)




Adjustable Cam Gear(s)? for the 5SFE?


--------------------

1995 GT::::Diffusing the Situation
エキサイティングカーレーシングチーム!
march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM
post Feb 10, 2015 - 6:37 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




QUOTE (Tigawoods @ Feb 10, 2015 - 6:22 PM) *
Adjustable Cam Gear(s)? for the 5SFE?


Yes they are red, i have two
post Feb 10, 2015 - 10:32 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




QUOTE (ST204BEAMS @ Feb 10, 2015 - 6:37 PM) *
QUOTE (Tigawoods @ Feb 10, 2015 - 6:22 PM) *
Adjustable Cam Gear(s)? for the 5SFE?


Yes they are red, i have two


but the 5s only has one cam gear?
post Feb 10, 2015 - 11:37 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




QUOTE (mkernz22 @ Feb 10, 2015 - 11:32 PM) *
QUOTE (ST204BEAMS @ Feb 10, 2015 - 6:37 PM) *
QUOTE (Tigawoods @ Feb 10, 2015 - 6:22 PM) *
Adjustable Cam Gear(s)? for the 5SFE?


Yes they are red, i have two


but the 5s only has one cam gear?


I bought them to go on the 3s, but ended up not using them cause i couldnt replace the vvti gear. The single 5s cam gear should be the same as the non vvti 3s cam gear no?
post Feb 11, 2015 - 6:36 PM
+Quote Post
ttoalyout

Enthusiast

Joined Feb 11, '15
From kansas
Currently Offline

Reputation: 0 (0%)




I'm looking in for the hose that goes from the filter box to the throttle body. Would you still have it?
post Feb 12, 2015 - 5:26 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




QUOTE (ttoalyout @ Feb 11, 2015 - 7:36 PM) *
I'm looking in for the hose that goes from the filter box to the throttle body. Would you still have it?


Its just a rubber hose right? I have a bunch of hoses sitting around the garage, i can look for it.
post Feb 12, 2015 - 9:57 PM
+Quote Post
VavAlephVav



Enthusiast
****
Joined Dec 3, '13
From Missourah
Currently Offline

Reputation: 0 (0%)




I think he means the main air intake duct "hose".
Did you say if it was California emissions or Federal?


--------------------
Bust a Deal; Face the Wheel.
post Feb 14, 2015 - 7:44 AM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




QUOTE (ST204BEAMS @ Feb 10, 2015 - 11:37 PM) *
QUOTE (mkernz22 @ Feb 10, 2015 - 11:32 PM) *
QUOTE (ST204BEAMS @ Feb 10, 2015 - 6:37 PM) *
QUOTE (Tigawoods @ Feb 10, 2015 - 6:22 PM) *
Adjustable Cam Gear(s)? for the 5SFE?
Yes they are red, i have two
but the 5s only has one cam gear?
I bought them to go on the 3s, but ended up not using them cause i couldnt replace the vvti gear. The single 5s cam gear should be the same as the non vvti 3s cam gear no?





No, they're different. The 3s cam gears are smaller than the 5s one. Also, the 3s has two, whereas the 5s has one because of an internal master / slave setup.

post Feb 14, 2015 - 2:29 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




Oh then I guess I bought 3rd gen 3sge/gte can gears. Sry for the mix up

QUOTE (mkernz22 @ Feb 14, 2015 - 8:44 AM) *
QUOTE (ST204BEAMS @ Feb 10, 2015 - 11:37 PM) *
QUOTE (mkernz22 @ Feb 10, 2015 - 11:32 PM) *
QUOTE (ST204BEAMS @ Feb 10, 2015 - 6:37 PM) *
QUOTE (Tigawoods @ Feb 10, 2015 - 6:22 PM) *
Adjustable Cam Gear(s)? for the 5SFE?
Yes they are red, i have two
but the 5s only has one cam gear?
I bought them to go on the 3s, but ended up not using them cause i couldnt replace the vvti gear. The single 5s cam gear should be the same as the non vvti 3s cam gear no?





No, they're different. The 3s cam gears are smaller than the 5s one. Also, the 3s has two, whereas the 5s has one because of an internal master / slave setup.

post Feb 14, 2015 - 9:24 PM
+Quote Post
Mandrew



Enthusiast
*
Joined Jun 5, '14
From Boise, ID
Currently Offline

Reputation: 1 (100%)




How much for the wiring harness? Also, is it the Cali spec 5SFE or the non Cali spec?


--------------------
Guys on car forums are always quoting the Fast and Furious movies. Meanwhile, I'm over here like: "If you ain't first, you're last!"
post Feb 14, 2015 - 9:41 PM
+Quote Post
ST204BEAMS

Enthusiast

Joined Nov 26, '14
From United States
Currently Offline

Reputation: 0 (0%)




Wiring harness has been sold

QUOTE (Mandrew @ Feb 14, 2015 - 10:24 PM) *
How much for the wiring harness? Also, is it the Cali spec 5SFE or the non Cali spec?


Closed TopicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 12:43 PM