Few technical questions, mostly interior oriented Options

[conus00]

Hi all,
I'm currently in the process of redoing my interior and a few questions came up. I bet you guys know the answers:
1. Will the carpet from hatchback fit coupe?
2. Will the back seat from hatchback fit coupe?
3. Are the A pillars interchangeable between hatchback and coupe?
4. Are all the dash trim pieces interchangeable (like speedo trim, radio bezel, shifter trim, glove box, driver and passenger kick panels, etc.)?
5. Will the complete doors (hinges, latch, door panels) from hatchback fit coupe?
6. How do I get rid off red dashboard seat belt indicator if I install aftermarket seats and harness? If I remove seats and keep the piggytails from the stock one can I just solder them together to create loop or am I just better off pulling out the dashboard bulb?

Thanks for your time to answer.

[SwissFerdi]

I'm pretty sure that all Celicas (save for convertible roofs, I guess) are the same from the front seats forward. Things like the various interior panels and bezels should all be interchangeable.

[trdproven]

i've never seen up close or inspected a coupe ever so I wouldn't know. I do not know anyone personally with a coupe that made me compare the differences.

[conus00]

Nobody else?
C'mon guys there must be more people out here with that type of knowledge.

[Batman722]

Hi all,
I'm currently in the process of redoing my interior and a few questions came up. I bet you guys know the answers:
1. Will the carpet from hatchback fit coupe?
Yes
2. Will the back seat from hatchback fit coupe?
maybe but probably no
3. Are the A pillars interchangeable between hatchback and coupe?
yes
4. Are all the dash trim pieces interchangeable (like speedo trim, radio bezel, shifter trim, glove box, driver and passenger kick panels, etc.)?
yes
5. Will the complete doors (hinges, latch, door panels) from hatchback fit coupe?
yes
6. How do I get rid off red dashboard seat belt indicator if I install aftermarket seats and harness? If I remove seats and keep the piggytails from the stock one can I just solder them together to create loop or am I just better off pulling out the dashboard bulb?
connect the 2 wires under the driver's seat or pull dash bulb

Thanks for your time to answer.

[conus00]

Batman722 thanks for the info, man.

As far as hatch seats fitting into coupe, they do fit!
I risked it and got them at the junkyard (they were only $20) and they fit just fine.
Hopefully somebody would find this information useful.

This post has been edited by conus00: Aug 10, 2009 - 9:51 AM

[CrossCudi]

So will the rear seats from a vert fit the hatch ?