FS: Custom aluminum celica GT intake manifold, V6 TB included Make a offer!! Options

[doory100]

custom Celica gt hi-output intake manifold. It is made out of .100" aluminum
With .187 aluminum end piece and a .250" thick flange. This intake was professionally tig welded and is air tight. This intake hosts a 2.5" inlet aposed to the 1.875 inlet on the gt.there are velocity stacks inside to help add more air flow. It comes with map sensor and brake boost hook ups. Camry v6 TB that is plug and play. TB has a extension in order for it to fully open using your original gt TB cable. This was fitted and worked perfect with no issues. This intake is new and was used for 4 days after installed. Due to a spun bearing in the motor wich is being replaced by a v6 1mz so I have no need for the intake.. Their are similar intakes on racerxfabrication that cost between $800-$900. They do not include the TB. This would be perfect for a turbo 5sfe or a agressive cam setup. It should get about 25-30 hp increase with a proper turbo setup.. Make a offer!! shiping extra from 13669. I will be heading to the ny boarder in a week or so to pick up parts and will ship it out then.



[/URL[URL=http://s1381.photobucket.com/user/Rory_McNabb/media/Mobile%20Uploads/20160130_162935_zpsjgani18b.jpg.html][/URL[URL=http://s1381.photobucket.com/user/Rory_McNabb/media/Mobile%20Uploads/20160130_163025_zpsbc7ivg6t.jpg.html][/URL[URL=http://s1381.photobucket.com/user/Rory_McNabb/media/Mobile%20Uploads/20160130_163148_zpsc11mehqg.jpg.html][/URL[URL=http://s1381.photobucket.com/user/Rory_McNabb/media/Mobile%20Uploads/2015-09/20150929_154756_zpsapess8fg.jpg.html]

This post has been edited by doory100: Feb 19, 2016 - 8:42 AM

[doory100]

Bump

[doory100]

Make an offer

[doory100]

Make a offer