GB: Exterior Mods from FUNKED, Package is Stateside Options

[Tigawoods]

***The Group Buy is now closed***

FUNKED is a UK company that has begun producing fiberglass copies of some great items for the 6th gen along with some original items like wider front and rear fenders (rears are still in development.)

Here is a small list of what is in stock at the moment for those of you who dont have a facebook to look at his gallery. I can provide you with some pictures and prices upon request if you are seriously interested.




************************************************************

• Christin front fenders (vented) - $180 USD
• Eurou Aerokit style rear lip
• OEM style side skirts - $118 USD
• OEM style roof spoiler $65 USD
• Zapt style side skirts
• SS-III style front spats $65 USD
• SS-III style spoiler riser blocks - $116 USD
• TRD style front spats ST202 - $65 USD
• TRD style front spats ST205 - $65 USD
• TRD style side skirts - $144 USD
• TRD style rear spats - $65 USD
• TRD Wing Fiberglass (no cf center available yet) - $230 USD
• Varis Extremor style front bumper
• Varis Extremor style rear bumper
• Varis Extremor style side skirts
• C-One style front lip (st205) - $144 USD
• C-One style front bumper (st205)
• C-One style rear lip
• C-One style side skirts
• Hiro style front lip (st205)
• Erebuni style front lip - $144 USD
• Treacle wide fenders (+55mm per side) - $360 USD

************************************************************


Quote from Edd Hunt from FUNKED about the savings in combined shipping
"My largest box is 180 x 70 x 60cm (70in x 27.5in x 23.6in), weight is not the issue the price is expensive because of size, so the more I can fit in the box the better. In one of these boxes I can normally fit a couple of full bumpers, couple of sets of sideskirts or front and rear lips, plus loads of smaller parts like spats, spoilers and riser blocks etc. On average probably 6-8 items depending on what they are and how they can be packed.
I would estimate this size box will cost around £350 ($511), but seeing as just sending a single bumper costs around £300 ($438) you can appreciate the price difference when divided by 6-8 items"

This can also open up a discussion on how to evenly distribute the shipping costs between everyone and who the bulk package is going to.

PM me or Post if you are seriously interested and in what item(s) and I will add you to the list.
FB Part List: https://www.facebook.com/FunkedRacing/photo...799971663447024

***********************************************
List:

1. Mike Thoma - Sideskirts/Erebuni Lip FULLY PAID
2. Mark Geddes (CA) - OE Skirts/ST205 C-One Lip/TRD Rear Spats FULLY PAID
3. Celica_MKVI - TRD Wing/ST205 C-One Lip FULLY PAID
4. kurt95gt - 2 SS3 Front spats FULLY PAID
5. mgnt232 (fb contact best) - ST205 TRD Front spats/TRD Rear Spats FULLY PAID
6. CrossCudi - (NJ) - TRD Wing Fiberglass FULLY PAID
7. Chinosan89 (Quang FB) - c one front lip (st205)/trd wing/Oem roof spoiler FULLY PAID
8. OUT Joser3741 - (16507) - TRD Front Spats ST202/TRD Rear Spats/ OE Roof Spoiler
9. OUT Cleveland Giant - TRD Wing Fiberglass
10. OUT Seng Jone Lee (cali/facebook) - C-One ST205 Front Lip/TRD Rear Spats

***********************************************

SHIPPING DISCUSSION (copied from later post in thread)

Please please throw any ideas or helpful input!!!

Shipping from UK to US:

Cost:
New estimated TOTAL shipping price from the UK should be around $700
*****
While we await an exact shipping quote I am accepting part payments, and then once I split up the shipping quote I will be accepting UK-US shipping payments. I will then be using a company called Transferwise as suggested by Edd. This is best way to lessen the International exchange rate fees and make the process less convoluted by having money converted once rather than 10 times by each buyer.
******

Edd and I will be working together to try and figure out how to fairly split the shipping costs for people who are only getting small items vs large item buyers.

Recipient:
I can have the package delivered to my local post office or like courier service (UPS/Fedex/DHL) and pick it up from their facility as to prevent any sort of odd variable of handler damage or theft that might occur if having it delivered to my house. Since I will be getting the package that would mean I would not have to pay for more shipping to my residence as everyone else will have to do, to even this out or make it more fair I can increase my shipping charge from the UK, how much that will be we can figure out along the way

Damage:
Upon receiving the package I will meticulously inspect every item for any damage I believe to have been caused during its shipment and notify the affected buyer and Edd of the issue and will take steps on resolving the problem.


Shipping within the US:

Cost:
At this moment I only have a few large boxes, I can get a bunch more from a local bodyshop to use to ship out the larger items. I am going to grab some of the dimensions of the larger items and start to grab some estimates for shipping.
I can use a specific courier service at each persons request (USPS/Fedex/UPS) along with any desirable insurance additives. USPS will probably be the cheapest for the smaller items but I know you all have experienced some bad times with them in the past as I have too. I believe if I pack the items smartly everything should remain intact.

Shipping payments will be made to me prior to shipping.

*******
I have done up a couple UPS estimates, one from me to Texas and from me to California. I used the minimum estimated dimensions for a person ordering lips and skirts (a custom tight fitting box that I would have to make) and the figure seems to be around $200 for ground shipping from me to CA and about $180 from me to Texas. I figure you can get a rough idea of where it will be to you based on those figures for people ordering large items. Once I actually get the shipment I will be able to work with the items and box them as small and safely as possible to whittle down that cost.
Smaller items will be significantly cheaper. I still have to figure out the cost for fenders and what size box it would use but i'd imagine it to be around the same $200 figure.
*******

Damage:
Im not sure what actions to take in this situation and any suggestions would be appreciated.

This post has been edited by Tigawoods: Aug 8, 2016 - 7:16 AM

[kurt95gt]

I'll have to check the prices again.
I,mean atleat 1 set of front splitters if not 2

[BonzaiCelica]

Those prices though... I see a trd replica spoiler local to me for $200... Link to pics?

[jordisonjr]

Is there a website for pics/pricing? Or just the facebook page?
May be interested in something!

[Tigawoods]

Those prices though... I see a trd replica spoiler local to me for $200... Link to pics?

Is there a website for pics/pricing? Or just the facebook page?
May be interested in something!

Link to the FB gallery has been added in the OP.
The TRD Spoiler is not in the gallery but it is available according to Edd. If you are interested in specific items and are not on Facebook or cant access the gallery, let me know and I can download the picture and post the price. There are alot of items, I dont feel like downloading them all at the moment. I may next week when I have a bit more time.

[BonzaiCelica]

Ahh darn the weak dollar

[presure2]

im just waiting on the TRD wing W/ C/F center, mike. if its available before your ready, ill do my best to get in.
i talked to edd the other day, he said he is waiting on his guy for the c/f work, apparently its taken more than 1 try to get it up to edds standards. do you have a quote for the standard TRD wing?

[Zeros2]

i may be interested in the Christin fenders and Trd side skirts I'll let you know


This post has been edited by Zeros2: May 14, 2016 - 3:58 PM

[Tigawoods]

im just waiting on the TRD wing W/ C/F center, mike. if its available before your ready, ill do my best to get in.
i talked to edd the other day, he said he is waiting on his guy for the c/f work, apparently its taken more than 1 try to get it up to edds standards. do you have a quote for the standard TRD wing?

I am awaiting a response from Edd

i may be interested in the Christin fenders and Trd side skirts I'll let you know

Christian Fenders: 180USD TRD Skirts: 143.60USD


As I get quotes I will add the prices to the main list.

This post has been edited by Tigawoods: May 14, 2016 - 4:11 PM

[jordisonjr]

Those prices though... I see a trd replica spoiler local to me for $200... Link to pics?

Is there a website for pics/pricing? Or just the facebook page?
May be interested in something!

Link to the FB gallery has been added in the OP.
The TRD Spoiler is not in the gallery but it is available according to Edd. If you are interested in specific items and are not on Facebook or cant access the gallery, let me know and I can download the picture and post the price. There are alot of items, I dont feel like downloading them all at the moment. I may next week when I have a bit more time.

Thanks, not expecting you download all the photos at all. I just looked quickly through them yesturday, but didn't look through comments for prices or anything. I thought maybe he had a website as well and I did a poor job searching. I'll
Take a closer look when I have some time

[Tigawoods]

Thanks, not expecting you download all the photos at all. I just looked quickly through them yesturday, but didn't look through comments for prices or anything. I thought maybe he had a website as well and I did a poor job searching. I'll
Take a closer look when I have some time

I thought that it would help to set up a database for him on the forums, but I figured that whenever he finishes the website that will just make what I did a little bit of a waste of time haha.
Yeah the prices in GBP should be in the description of each picture.

TRD Wing price has been added to the list

This post has been edited by Tigawoods: May 15, 2016 - 6:45 AM

[Overkill]

If you get an order going, you can count me in for...

1.) TRD Wing Fiberglass (no cf center available yet) - $229.70
2.) TRD style side skirts - $143.60 USD
3.) Erebuni style front lip (depending on price)

[Tigawoods]

If you get an order going, you can count me in for...

1.) TRD Wing Fiberglass (no cf center available yet) - $229.70
2.) TRD style side skirts - $143.60 USD
3.) Erebuni style front lip (depending on price)

price added to the list, check it and let me know and I will add you to the list


Again, if we get 6 or 7 people on this, shipping cost for each person (depending on how many items they get) could be as low as $15
(I have yet to figure out how to incorporate the smaller items being bought and their shipping cost cuts, any suggestions welcome)

[Overkill]

If you get an order going, you can count me in for...

1.) TRD Wing Fiberglass (no cf center available yet) - $229.70
2.) TRD style side skirts - $143.60 USD
3.) Erebuni style front lip (depending on price)

price added to the list, check it and let me know and I will add you to the list


Again, if we get 6 or 7 people on this, shipping cost for each person (depending on how many items they get) could be as low as $15
(I have yet to figure out how to incorporate the smaller items being bought and their shipping cost cuts, any suggestions welcome)

Lets do it! Add me in for all three.

[Zeros2]

I am for sure 100% I'm for the fenders I'm just trying to think if I should get anything else. But please add me to the list for the Christian fenders

[Overkill]

We need more people on this!

[Tigawoods]

I am for sure 100% I'm for the fenders I'm just trying to think if I should get anything else. But please add me to the list for the Christian fenders

Added ya!

We need more people on this!

Yes we do.

I messaged Edd and informed him of the current amount on the list thus far. I want to make sure we dont overfill the box and have to kick people out

[4-eyed-freek]

Too bad he doesn't have a euro chin spoiler. I would die to have one of those!

[jordisonjr]

When are you hoping to have this order in? I move home in a couple weeks, and can't really commit at the moment.
But I'm definitely considering it.

[Tigawoods]

When are you hoping to have this order in? I move home in a couple weeks, and can't really commit at the moment.
But I'm definitely considering it.

Not for another month or so. You should have some time. No real rush. We only have a couple people in so far