![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast Joined May 21, '16 From Kansas Currently Offline Reputation: 0 (0%) ![]() |
I am a celica freak, I want to take a 5sfe block and build a full race motor. I also want to rework the rear and create space for an awd system. Was wondering if anyone has attempted this yet? If so what problems did you encounter and tips for finding parts. All work will be done by me and my friend who is a certified mechanic.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
a celica freak huh?
I dont think we've had one of those here before -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 12, '13 From Bulgaria Currently Offline Reputation: 53 (100%) ![]() |
5sgte + ST205 floor pan
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
I think this question belongs in the celica facebook group
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() |
|
![]() Enthusiast ![]() Joined Nov 13, '14 From MIA Currently Offline Reputation: 5 (100%) ![]() |
Lol wut.
-------------------- Rare JDM Dealer Option Parking(Proximitiy) Senor for sale
http://www.6gc.net/forums/index.php?showtopic=97051 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) ![]() |
I am a celica freak, I want to take a 5sfe block and build a full race motor. I also want to rework the rear and create space for an awd system. Was wondering if anyone has attempted this yet? If so what problems did you encounter and tips for finding parts. All work will be done by me and my friend who is a certified mechanic. We all have that one friend who is a "mechanic" .... ![]() To answer your question, yes it has been done before. Search around and you will find some good info to show your "mechanic" -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
![]() Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
![]() |
|
Enthusiast ![]() Joined Sep 25, '08 From colorado Currently Offline Reputation: 0 (0%) ![]() |
To even ask these questions means you have done no research
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
I am a celica freak, I want to take a 5sfe block and build a full race motor. I also want to rework the rear and create space for an awd system. Was wondering if anyone has attempted this yet? If so what problems did you encounter and tips for finding parts. All work will be done by me and my friend who is a certified mechanic. Never to be posted from again.... -------------------- |
![]() |
|
Enthusiast Joined May 21, '16 From Kansas Currently Offline Reputation: 0 (0%) ![]() |
To even ask these questions means you have done no research The research ive done syays that the rear end has to be completely rebuilt from.sheet metal down and I know the motor can handle.the power. Was just seeing if folks had some tips and tricks. Finding the parts and importing them isnt easy and was just looking for knowledge, not looking for trolling people |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
do you think a 5s will take that horsepower? lol.
This post has been edited by njccmd2002: Jun 4, 2016 - 9:18 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 25, '15 From United States Currently Offline Reputation: 4 (100%) ![]() |
First off I don't think anyone is even remotely pushing close to 600hp with the 5sfe block. Hell that's a lot of power for the 3sgte or damn near any 4 cylinder block. I personally don't think a 600hp+ celica would be street able at all. Also the funds to make a 600hp car wouldn't be cheap at all. You'll be better off finding a v8 to modify. Any sub 2500 pound car pushing 300whp is definitely more than enough. Let's put it this way a 275whp na/nb miata can keep up if not out run a z06. So unless you plan to drag this thing it's a death sentence.
|
![]() |
|
Enthusiast ![]() Joined Sep 25, '08 From colorado Currently Offline Reputation: 0 (0%) ![]() |
To even ask these questions means you have done no research The research ive done syays that the rear end has to be completely rebuilt from.sheet metal down and I know the motor can handle.the power. Was just seeing if folks had some tips and tricks. Finding the parts and importing them isnt easy and was just looking for knowledge, not looking for trolling people There are many different ways of doing the awd conversion, people have used the rear sheet metal to rebuild the rear and just bolting the sub frame in. There are many threads in the project section showing this, I have also seen people make there own custom mounts and just weld them in which works too. Again search the threads.. |
![]() |
|
Enthusiast Joined May 21, '16 From Kansas Currently Offline Reputation: 0 (0%) ![]() |
I've seen pressure tests with 5sfe being able to handle more power than an evo block. Now those push over 1000 if you do it right, thats my end goal. And it will drag and have full cage and.cradle, ive got kids so cant mess around with safety. Custom.heads and precision turbo isn't cheap either. I understand the budget. From.what ive heard to get and build the rear is prob gonna run around 5 to 6k.
|
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
A block being able to handle static pressure is one thing, a block being able to handle dynamic loads is another thing entirely. At 1000hp from a 2.2L you'll need to make 250hp on each cylinder, roughly double the stock power output of the WHOLE ENGINE will be loaded on EACH rod bearing. There's not going to be enough bearing surface present to sustain that load for any meaningful length of time assuming it doesn't fail on the lead up to that power level. Not to mention the loading on the crank and it's main bearings against the block, likely you'll run out of oil film down there too and if it doesn't spin/scuff bearings from load it'll be doing so from the block distorting. The only way you're going to get away with running that kind of power on a somewhat reliable basis is to get a custom block machined, and at that point it's not a 5S-FE anymore, it's a hunk of billet with water jackets and cylinder liners pressed into it.
And then there's the drivetrain itself, it's not going to stand up to 1000hp. Period. You'll be scouring for $20,000 WRC transmissions and $10,000 WRC differentials, buying custom axles, you'll end up with a $90,000 car that runs 10's and breaks something new every 4th run. If you want 1000hp buy a lightly used GTR and mod it, it'll be cheaper and more reliable in the long run and hey it's a GTR! Now, if you shoot for 500hp that's more reasonable and attainable and can possibly be made reliable. Go for that. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 12, '13 From Cleveland Currently Offline Reputation: 5 (100%) ![]() |
I've seen pressure tests with 5sfe being able to handle more power than an evo block. Now those push over 1000 if you do it right, thats my end goal. And it will drag and have full cage and.cradle, ive got kids so cant mess around with safety. Custom.heads and precision turbo isn't cheap either. I understand the budget. From.what ive heard to get and build the rear is prob gonna run around 5 to 6k. I wanna see these 600hp+ 5sfe, are you keeping it NA, or Forced Inductions (turbo/supercharger), Any links to these pressure test? Alot of us who commented on this thread has been in the 6gc community for 8+years, myself for 15 years and seen alot of these what if post. Countless hours of research for these engines. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
Ive seen a few 5sgte builds (from alltrac/mr2) pushing 500-600, but that's a decently crazy build. I would lower your expectations a bit, 1,000hp is ridiculous. The 300ish an st205 gets you is a lot faster than you'd think
The general support for something over those build just isn't available, it would all be custom. This post has been edited by mgnt232: Jun 6, 2016 - 7:37 AM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
The only way you're going to get away with running that kind of power on a somewhat reliable basis is to get a custom block machined, and at that point it's not a 5S-FE anymore, it's a hunk of billet with water jackets and cylinder liners pressed into it. Just what I was about to say. Most people who would ACTUALLY do something like this wouldn't come to an enthusiast forum to ask for help and opinions. These unimaginable feats are usually performed by engineers from race-teams funded by eccentric millionaires. (which is why our reaction was that YOU were trolling us not us trolling you) ![]() -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 26, '09 From Los Angeles Currently Offline Reputation: 1 (100%) ![]() |
The only way you're going to get away with running that kind of power on a somewhat reliable basis is to get a custom block machined, and at that point it's not a 5S-FE anymore, it's a hunk of billet with water jackets and cylinder liners pressed into it. Just what I was about to say. Most people who would ACTUALLY do something like this wouldn't come to an enthusiast forum to ask for help and opinions. These unimaginable feats are usually performed by engineers from race-teams funded by eccentric millionaires. (which is why our reaction was that YOU were trolling us not us trolling you) ![]() My dream job followed by my dream status -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) ![]() |
I've seen pressure tests with 5sfe being able to handle more power than an evo block. Now those push over 1000 if you do it right, thats my end goal. And it will drag and have full cage and.cradle, ive got kids so cant mess around with safety. Custom.heads and precision turbo isn't cheap either. I understand the budget. From.what ive heard to get and build the rear is prob gonna run around 5 to 6k. While I'm glad that you've found 6gc, I'm sorry to inform you that you are looking on the wrong board for information on building a 5s-gte hybrid engine. Better info can be sourced from alltrac.net or mr2oc.com In reality though, there are a few 5sgte's pulling decent numbers (600-1000hp), but it is true they need to be rebuilt often for the reasons stated above. As for the AWD conversion, there are a few cars on this board with the conversion completed, however information is limited at best. The easiest route is to import a rear cut ST205 and cut/weld the floorpans. FYI: The fastest ST185 in the US is running in the high 900's (on a 5sgte fully forged, balanced and blueprinted up to 10krpm) with a 205 trans and diff. I know that he is running a custom 1pc CF drivshaft, but am unsure of the axleshafts. It's not for the faint of heart or light wallet -------------------- ~bloodMoney
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
I think this question belongs in the celica facebook group X2 -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() ![]() |
Lo-Fi Version | Time is now: August 31st, 2024 - 3:07 AM |